China 304 Stainless Steel Chain and Sprocket manufacturer

Item Description

Hefty Duty Offset Hyperlink Roller Chain Sprocket

Our sprocket wheel for meshing with weighty responsibility offset website link roller chains undergoes integral hardening and tempering, so as to supply superior mechanical efficiency as nicely as high toughness and deformation resistance. Owing to this, it supports functioning with large load.

By means of substantial frequency quenching, the teeth of our roller chain sprocket appear with high hardness and superb putting on resistance.

According to the software demands, this selection of product can be processed into the welded variety so as to help save users’ expense.
 

Matching Chain No. Chain Pitch (mm) Outer diameter of chain roller (max.) (mm) Height of chain sidebar (max.)(mm) Inner width of slim conclude (b1)
Nominal worth (Min. b1)=.95b1) (mm) ANSI normal (min.)(mm)
2571 36.5 31.75 forty seven.80 38.10 36.six
2512 seventy seven.nine forty one.28 sixty.5 39.60 38.one
2814 88.ninety 44.forty five 60.fifty 38.ten 36.six
3315 103.forty five forty five.24 63.fifty 49.thirty 47.two
3618 114.30 57.fifteen 79.20 52.thirty 50.three
4571 127.00 63.50 91.ninety 69.90 sixty seven.one
4824 152.forty 76.twenty 104.sixty seventy six.20 seventy three.2
5628 177.80 88.ninety 133.40 82.sixty 79.two

For a lot more than twenty several years, we have centered on customized chains.

For a lot more than twenty years, We have d100s of various kinds of industrial chains.

So we have a wealth of personalized chain expertise.

Right here are some of the versions of the chains.

Why Choose DCC? 
1.HangZhou Xihu (West Lake) Dis.wu chain transmission production co.,Ltd is a professional manufacture of chains,and is the member device of China Countrywide specialized committee for standardization for china transmission,
2.we occupied an region more than one hundred thousand sqm,owned standard workshops in excess of thirty hundreds sqm and above 300sets of specialist equipments to produce chains in massive-scale as effectively as total inspection and take a look at devices.
3.we handed by way of the authentications of ISO9001:2000 international high quality technique and ISO14001 environmental administration system .
4,we have seventy five% of merchandise which are exported to Europe,The us,Japan , Southeast Asia ,and so on,
5.Almost all the components are created by our possess factory,therefor we can control the cost and top quality.
Pick DCC,you choosed Substantial top quality , competitive price,ideal support,
would like we will market enterprise as properly as friendship!
 

 

US $1.3-10
/ Meter
|
10 Meters

(Min. Order)

###

Application: Industry
Hardness: Hardened
Manufacturing Method: Cast Gear
Toothed Portion Shape: Spur Gear
Material: Carbon Steel
Type: Circular Gear

###

Customization:

###

Matching Chain No. Chain Pitch (mm) Outer diameter of chain roller (max.) (mm) Height of chain sidebar (max.)(mm) Inner width of narrow end (b1)
Nominal value (Min. b1)=0.95b1) (mm) ANSI standard (min.)(mm)
2010 36.5 31.75 47.80 38.10 36.6
2512 77.9 41.28 60.5 39.60 38.1
2814 88.90 44.45 60.50 38.10 36.6
3315 103.45 45.24 63.50 49.30 47.2
3618 114.30 57.15 79.20 52.30 50.3
4020 127.00 63.50 91.90 69.90 67.1
4824 152.40 76.20 104.60 76.20 73.2
5628 177.80 88.90 133.40 82.60 79.2
US $1.3-10
/ Meter
|
10 Meters

(Min. Order)

###

Application: Industry
Hardness: Hardened
Manufacturing Method: Cast Gear
Toothed Portion Shape: Spur Gear
Material: Carbon Steel
Type: Circular Gear

###

Customization:

###

Matching Chain No. Chain Pitch (mm) Outer diameter of chain roller (max.) (mm) Height of chain sidebar (max.)(mm) Inner width of narrow end (b1)
Nominal value (Min. b1)=0.95b1) (mm) ANSI standard (min.)(mm)
2010 36.5 31.75 47.80 38.10 36.6
2512 77.9 41.28 60.5 39.60 38.1
2814 88.90 44.45 60.50 38.10 36.6
3315 103.45 45.24 63.50 49.30 47.2
3618 114.30 57.15 79.20 52.30 50.3
4020 127.00 63.50 91.90 69.90 67.1
4824 152.40 76.20 104.60 76.20 73.2
5628 177.80 88.90 133.40 82.60 79.2

How to choose the right sprocket

Knowing the size of the chain is important when looking for the right sprocket. Also, you must know the number of teeth you need and their angle. The angle between the teeth is equal to 360 degrees divided by the number of teeth. This information will help you find the right sprocket for your specific application.sprocket

Long Through Hole

Sprockets are critical to the efficiency and uptime of roller chain drives. To ensure your sprocket is installed correctly, it is important to know the dimensions of the sprocket, including its outside diameter, through-hole length, and hub diameter. Pore ​​size is also an important consideration. Most sprockets have a 1/8″ bore, while others may have a larger bore.
Sprockets are usually secured to the shaft using ANSI standard-sized keyways and set screws. However, not all sprockets are compatible with all shaft diameters, so it is important to check the keyway size before purchasing.
Sprockets are available in a variety of styles and configurations. Some types of sprockets are welded to a solid hub, while others are bolted or split to the hub. Both types have different adjustments and you can easily change them without disassembling the device. Sprockets can be purchased from many US manufacturers in A, B or C hub configurations. For example, the hub diameter of an A-type sprocket determines its width, while a B-type sprocket has a hole for a bushing.
Sprockets are used in chain-driven motion systems, usually to carry heavy loads. It is very important to choose the right app for the right app to avoid damaging your device. If you’re not sure, learn about your system and how it’s assembled.

face width

The face width of the sprocket is limited by the meshing clearance with the chain. It does not affect tooth length. The outside diameter of the chain tip may vary depending on the type of tool used. Dimensional tolerances for keyways and set screws are also important.

diameter

One of the most important characteristics of a sprocket is its diameter. The diameter of the sprocket is used as a guide for choosing the proper sprocket size for your bike. Its number of teeth and diameter also affect the size of the chain.
The diameter of a sprocket is a function of its pitch or the distance between the centers of the link hinges. Diameters are in millimeters and expressed in standard ANSI chain numbers. Popular spacing is 3/8″ or 1/2″.
In order to make the chain drive smoothly, the sprocket and the chain should be properly matched. Incorrect pitch sprockets can damage the chain and shorten its life. Sprockets should provide precise tooth count, consistent pitch, and high wear resistance. It should also be designed to be rigid and impact resistant. CZPT chain suppliers can custom design sprockets in a variety of sizes, pitches, and diameters to suit your needs.
The number of teeth on the roller sprocket is also important. This is because the sprocket is in contact with the chain, causing frictional wear. The teeth on the sprocket can affect the durability of the chain, which is why choosing a sprocket with hardened teeth can change the world.sprocket

hub type

The hub type of the sprocket is key to proper engagement with the chain. Several options are available. The sprocket hub type is cylindrical and is available in a variety of sizes and styles. Sprockets are usually made of steel or stainless steel.
There are four main types of hubs for sprockets. They come under different names from different manufacturers, but they all share some common characteristics. These include Types A, B, and C. Each type has its own advantages and disadvantages. A-Plate sprockets are flat and have no hubs, while B-Hub sprockets are flat with hubs mounted on one side of the plate. C-shaped sprockets extend on both sides of the plate for larger pitch circle diameters and heavier axles.
A sprocket with a large pitch diameter needs a sprocket with a large pitch, and a chain with a small pitch diameter needs a chain with a small pitch. A-type sprockets are smaller and fit more closely to the equipment, while C-type sprockets need to be wider and thicker to carry more weight. Also, the pitch diameter is important because it determines whether the sprocket will fit correctly with the chain.
Steel split sprockets are easy to install and remove. They are held together by bolts on the hub, ranging in pitch size from 40 to 240. They are typically used in applications involving multiple drive shafts.

HZPT ZTB series

ZTB sprockets are an important part of a bicycle chain system. Its uptime is very important to maximize uptime and efficiency. key cSelect sprockets are characterized by size, pitch and bore. MDS accepts sprockets of various bore diameters from 1/2″ to 2″.
A sprocket is a wheel-like structure with teeth on the end. These teeth interlock with the chain, allowing simple rotational movement of large machines and equipment. ZTB sprockets are an excellent choice for a wide range of applications, including construction and agricultural machinery.
ISO sprockets have a suffix number indicating the number of chains in the chain. For example, 16B-2 sprockets have 1″ pitch and dual spools. If you’re buying sprockets for your bike, be sure to check the sprocket pitch.
The teeth on the sprocket are responsible for frictional wear, so choosing the right teeth is critical. The right teeth can increase the life of the sprocket and chain. A good sprocket has at least 17 teeth. Sprockets with a higher number of teeth last longer without causing chain slip. Typically, the teeth are the same material as the sprockets, but you can find removable teeth for a more affordable option. The teeth on the sprocket can also be hardened. Induction hardening is the most commonly used process.
ZTB sprockets can be made from many different materials. Some materials are more expensive than others, while others are softer and stronger. If you’re not sure which one to buy, try explaining the difference between the different sprockets to the sprocket manufacturer. They should be able to give you details about their interchangeability and quality.
sprocket

set screw

Set screws are screws designed to hold two or more parts together. There are many different types of set screws, each with a different purpose and design. They usually come in imperial and metric sizes with a hex socket driver on one end and a cup tip on the other. They are made of hardened steel and have a black oxide finish. Some varieties have flanges, while others don’t.
Set screws with chain studs can be used in a variety of applications. For example, they can be used in agricultural equipment, heavy equipment and other industries. They come in several different sizes and thread sizes and are available in a variety of designs. Some are specific to the mining industry, while others are more general.
The company also offers custom setscrews, as well as hex, spline, square and socket heads. They have the capability to manufacture fasteners ranging from carbon steel to nickel and silicon bronze. Their products also meet Mil-I-4528 and QS 14000 standards.

China 304 Stainless Steel Chain and Sprocket     manufacturer China 304 Stainless Steel Chain and Sprocket     manufacturer
editor by czh 2022-12-02