China OEM Yx19-74-740 Roll Forming Machine for Corrugated Profile with Good quality

Item Description

This Producing Method Sketch As Beneath Photo:

This Profile Drawing As Underneath Photo:

Common Parameter

one Item Parameters
two Product NO. YX19-74-740
3 Substance Pre-painted galvanized sheet
4 Thickness .18-.3 mm
five Produce Strength 550-600 MPa
6 Feed Width 890/895/900 mm
seven Efficient width 740 mm
8 Roll Levels 24 Stages
9 Shafts Diameter ф75 /95 mm
10 Primary Motor Electricity 30 KW
eleven Hydraulic Group Electrical power 5.5 KW
twelve Max. Line Pace Of Roll Previous Approx.40m/min
13 Electric Normal According to regional voltage



Device Components 

A.   10Ton*1250mm Hydraulic un-coiler with coil auto
Hydraulic program to grow coil inner gap, Pump motor: 5.5KW
Taper wedge expand variety
Double stage growing palms with 2 coil bore variations of 480-530 and 580-630
Load Capability: Max. ten Tons Coil Width Max. 1250mm
Coil Outer-diameter Max. 1500mm
Retarding Motor to turn the coil, Motor: 7.5KW
Sustain arm on the best, to avoid coil turn into loose when quit to be packed.
The arm to be driven by pneumatic cylinder, manual management
The air supplier need to be supply by the person
With coil vehicle
Up/Down stroke of Coil Auto: Max. 350mm
Forward/backward stroke of Coil Car: Max. 2000mm


B.  Entry bench and Handbook pre-shearing device     Un-powered
Doing work thickness: up to .5mm
Sensible lower control, to cut off the conclude of the last piece of sheet only

C.  Cold Rolling Mills 

Feeding area with guide
Gear/Sprocket driving24 phases to type
Wall-plate body layout
Rollers made from 45# steel,CNC lathes,challenging chrome coating 
Shafts Diameter=ф75/95mm, Precision Machined
Primary motor =30KW,Frequency pace handle
Max line speed of roll former: Approx.40m/min
Because of to slender and challenging material. Never make at max. Line speed.
Generation velocity: 20-29M/min
Safety Mesh Go over (full mesh variety) Above Roll-previous To Keep away from
Fingers Go Within
The picture beneath is only for your reference:

D.  Hydraulic Reducing Unit
Cease to lower, Post lower, No Blanking cut
Pump motor =5.5KW
Chopping resource content : Cr12, Heat treatment method
The adhering to picture is for your reference only

E.   PLC Management Technique
Control the amount & reducing size instantly
Merged with: PLC, Contact Monitor, CZPT (SIEMENS), Encoder (Omron), Distant Control and so on
Cut-to-size tolerance≤±2 mm
 Control Voltage 24V

Stacking Size Max. 6 meters, Min. 1 meter
Pile up the sheet following reducing automated.
Equipped with a bottom pallet to be pull out by motor driven
Assist arm action in vertical course, driven by pneumatic program
Action managed by Pneumatic technique.
The air supply provided by the user




Right after-Sale Support

In proper operation & keeping, the equipment is guaranteed for 1 calendar year considering that leaving our manufacturing unit excludes the electrical elements.
If installation is needed, WE will dispatch a technician to the buyer’s manufacturing facility abroad to aid regulating the machine with demand cost-free. The purchaser should aid US to get the Chinese technician’s visa and ought to shell out for the roundtrip air ticket and the regional lodging.
If set up is required, the purchaser shall make the pursuing planning before arrival of experts.

Conditions Of Trade

one.Bundle & Cargo: Facility water-evidence packing, Manage cupboard packed in wood packing.
2.Payment: 30%payment by T/T is needed as deposit inside of a 7 days because the agreement signing day.70% payment by T/T is needed ahead of the equipment be deliver out of manufacturing facility.

System performance is highly dependent on the conversation of the sprockets, which means that the sprockets you pick generate the good results of your procedure. Make the appropriate and effortless choice with ep’s sprockets. Tsubaki gives chain and sprocket production abilities. The chain meshes properly with the sprockets for long provider daily life and dependable efficiency. This signifies lengthy-phrase savings and real price for your functions. Minimize routine maintenance downtime, increase productivity and reduce alternative costs
Sprockets are made to ISO606 and ASME hundred specifications, offered in plate, one and double hub configurations, made from high high quality carbon metal, optional tapered bushings simplify set up and removing, treatments offered upon ask for, such as black oxide

China OEM Yx19-74-740 Roll Forming Machine for Corrugated Profile     with Good quality