China supplier HSH-A 619 Series Lever Block with high quality

Solution Description

HSH-A 619 Sequence Lever Block

Lever block is a type of hand lifting resource for large responsibility operate level. It is effective, risk-free, tough with the purpose of lifting, pulling, and tensioning, particularly useful in the condition of no energy supply. Lever block is pushed by rope or chain via the deal with, creating total use of lever basic principle. It is broadly utilized to factories, mines, design websites, docks, transportation, and so forth.

one. CZPT CZPT Load.

two. Change the reversible slide change to the higher position and you might carry the bottom hook.

three. Fast targeting.

four. Pull out the hand wheel, the duration of the load chain can be easily adjusted to the proper place.

five. Sound bearing.

six. Sound bearing is adopted in the joint of major axis and load sprocket wheel, to enhance the versatility and operating efficiency.

seven. Bearing of the bottom hook housing.

8. The base hook can swivel 360 diploma freely under load.

nine. Special overload safety.

ten. Un-directional cost-free wheel gadget to make sure the smooth descent of the hoist.

Design   HSH-.75A HSH-1.5A HSH-3A HSH-6A HSH-9A
t .seventy five one.5 3 6 9
Normal Lifting
m 1.5 1.five 1.5 1.five 1.five
Running Check Load kn nine.two eighteen.4 36.eight seventy three.five 110.3
Work Needed to Elevate Rated Load  N(kg) 140 240 320 340 360
Strands of
  Load Chain
  one one 1 2 3
Laod Chain Diameter mm 6 eight ten 10 10
A 148 176 195 195 195
B 88 102 109 109 109
C one hundred thirty five 102 211 254 319
D 37 forty five fifty 64 eighty five
H 320 380 480 620 700
L 290 420 420 420 420
K 26 32.five 38 forty eight 50
N. W. kg seven.7 eleven.eight 21 32 forty seven
Packing Measurement cm 35.5× 14× sixteen.5 forty six.5× 15.5× 19 51× 19× 21.5 53× 22× 21.five 82× 32× 21.five
Further Bodyweight per Meter of Added 1 Meter Lift  kg .8 one.4 two.fifteen four.three 6.forty five

Bushing Sprockets: Bushing sprockets can simplify chain system maintenance by changing only worn sprocket assemblies, even though the bushings can still be reused. The bushing also has a tightly tapered mating surface that can transmit higher torques than basic critical factors. Near-fitting surfaces provide far better performance in applications with hefty start off/end operations or shock hundreds.
The enamel of a one pitch sprocket mesh with one tooth for each sprocket. Double pitch sprockets search like solitary pitch sprockets, but the chain only meshes with the other tooth. This indicates that a double-pitch sprocket has the exact same variety of enamel as a one-pitch sprocket, but only half of the tooth are engaged with the chain. The primary variation is that the double pitch sprockets are reduce with a specific pitch circle diameter for ideal engagement. For ep roller chains, the sprockets are the identical if the amount of tooth is 32 or a lot more for one and double chains.

China supplier HSH-A 619 Series Lever Block     with high quality