China wholesaler 1.5 mm plastic rod Nylon Bar Pom Welding Rods sprocket chart

Model Number: GQ-NR-571
Product name: 1.5 mm plastic rod Nylon Bar Pom Welding Rods
Material: 100% Virgin Material
Color: Black,yellow,white,red,etc
Diameter: 5mm~400mm
Type: Extruded or Casting
Length: Customized Length
Material density: 1.2g/cm3
Application: Gears, Bushes, Sprockets, Pulleys, Rollers
Sample: available
Tolerance: +/-0.05mm
Packaging Details: weaved bag and wooden case or customized
Port: ZheJiang

1.5 mm plastic rod Nylon Bar Pom Welding Rods PA is a kind of thermoplastic engineering plastic material, also can be called Nylon. It is the most important engineering plastic material in the world, and widely used in cars, machinery, electronics, communications-equipment, architecture.This material is a kind of transparent or semitransparent white crystalline polymer, and has a large range of usage temperature. There are PA6, PA66 for this material, and PA66 has better properties in mechanical strength, stiffness, heat and abrasion resistance, size stability, but impact strength is not very good.There is another material in PA called MC, have much better properties in mechanical strength, stiffness, impact strength, it is suitable to make large product which can be extruded.
Suitable for the production of wear-resistant parts, transmission structure parts, appliance parts, automobile manufacturing parts to prevent the screw machine parts, SWC- DH short flex welding type cardan shaft universal coupling chemical machinery parts, chemical equipment. Such as turbines, gears, bearings, impeller, crank, dashboard, drive shaft, valves, vane, screw, high pressure washers, screws, nuts, seals, pike, sets of simple, sleeve connector.Monomer casting nylon.

Product name 1.5 mm plastic rod Nylon Bar Pom Welding Rods
Material 100% Virgin Material
Color Black,yellow,white,red,etc
Diameter 5mm~400mm
Length 300mm,600mm,1000mm,3000mm,or customized size
Density 1.17g/cm3
Water Absorption 2.0%
Tensile Strength 89MPa
Feature 1.High Wear-resistance2.Good Anti-corrosion-resistance3.Good self-lubrication4.Very high-impact resistance5.Good low temperature resistance6.High inadhesion resistance7.Non-toxic and clean property
Delivery Time 5-20 working days after your payment
Payment TT, western union, paypal, etc
Packaging weaved bag and wooden case or customized

Detailed Images If you need a sample or want to know more details, TS5C-38-1012 Clamp type spiral coupling for servomotor shaft connect one-piece metallic spring coupling Aluminum Alloy please click here to send us an inquiry.
Related ProductsThis is our other product, if you like, you can click the picture below now.

Company Information HangZhou GaoQiang Sealing materials Co., Ltd. is located in HangZhou City, ZheJiang Province hinterland Jizhong Industrial Park, strategic location and convenient transportation. From ZheJiang , ZheJiang , the 3 major urban centers of the lot. Over the years, companies rely on advanced technology and technology, sophisticated production equipment, with strong technical force, “quality of survival, relying on the credibility of development,” and constantly carry out technological innovation, won the long-term cooperation with merchants and laid a CZPT Business development.
My company has advanced production equipment, research and development, production and sales of more than 500 people, the company mainly produces: rubber sheet, sealed (gland packaging, spiral wound gaskets), PTFE products. Insulation materials,epoxy sheet,3240,fr4 epoxy glass laminate sheet,engineering plastics such as nylon more than 10 series, more than 200 kinds of products, for the power, Men Women Couple Friendship Magnet Buckle Bicycle Chain U Shape Horseshoe Buckle Two Toned Rope Bracelet water conservancy, chemicals, machinery, petroleum, shipbuilding, transportation and other industries to provide a high-quality sealing material. Our company will be based on long-term, people-oriented, innovative, committed to new technologies, new product development of new technologies, our CZPT mission.
Our Services1) High performance cost ratio with steady quality2) OEM service and Prompt Delivery3) The fast speed of reply your email and can make quotation sheet just for you.4) Can provide free sample, only need you bear the sample fee.5) Supply good after-sales service, we will follow-up the situation after using, if have problems,we will find out the reason and deal with positively.
Packaging & Shipping
FAQ Q1: Are you a manufacturer?A1: Yes, we have been in providing the professional products in this field.

Q2: Is customized available ?
A2: Yes, according to your detailed drawings you provide.

Q3: How to pay?A3: Via Paypal ,T/T payment, L/C,Western Union, MoneyGram,Trade Assurance and other payment. About the payment details please feel free to contact us. Thank you!Q4:Can you supply sample?A4:Yes,we can supply you free small samples,but air cost will be paid by customers.Q5:How many days will the samples be finished?And how about the mass production?A5: Generally the samples will be sent immediately by the air express in 3-5 days if the goods are in stock. Normally within 7-15 days or according to your order.

Q6. What is your terms of packing?
A6:We will choose suitable packing depend on materials.Also we can pack the goods in your branded boxes after getting your authorization letters.

Q7. Do you test all your goods before delivery?A7: Yes, we have 100% test before delivery.
Contact UsPlease contact us through the above Contact information or click the picture below.
Black Home >>
1.5 mm plastic rod Nylon Bar Pom Welding Rods


What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China wholesaler 1.5 mm plastic rod Nylon Bar Pom Welding Rods   sprocket chartChina wholesaler 1.5 mm plastic rod Nylon Bar Pom Welding Rods   sprocket chart
editor by Cx 2023-07-07