Tractor sprockets drive the chain mechanisms in PTO-powered implements, front-end loader chain drives, track-type tractor undercarriage systems, and auxiliary equipment chains. Australian agricultural conditions — extreme heat, red dust, crop residue, and seasonal peak loading — demand sprockets with hardened teeth, corrosion protection, and robust construction. We supply tractor sprockets in ANSI #40–#80 and ISO 08B–16B with zinc or zinc-nickel plating for outdoor durability.
| 매개변수 | 범위 | 관습 |
|---|---|---|
| 정점 | 12.7–25.4mm (1/2″–1″) | 예 |
| 체인 | ANSI #40, #50, #60, #80 / ISO 08B–16B | 예 |
| 이 | 13–45T | 9–76T |
| 재료 | C45 / 4140 | SS304 |
| Hardness | HRC 40–50 | — |
| 표면 | Zinc plated | Zinc-nickel, HDG |
| 바퀴통 | B-Hub keyed | TL, QD |
| 구경 | H7, 15–50mm | To shaft spec |
| 티르 | ≤0.03mm | — |
| 임시 | -10°C to +60°C | — |
| Dust Protection | Sealed bearing idlers avail. | — |
| 키웨이 | DIN 6885 / AS 1403 | Imperial |
| 바닷가 | Simplex / Duplex | — |
| 속도 | Up to 1,000 RPM | — |
| PD (21T #60) | 127.8mm | — |
| OD (21T #60) | 139.4mm | — |
| Max Bore (21T #60) | 38mm | TL extends |
| Weight (21T #60) | 1.8 kg | — |
| Lubrication | Grease or oil | — |
| 인증서 | ISO 9001 | EN 10204 3.1 |
✅ Zinc-plated as standard — inferior sprockets ship bare steel, rust within weeks outdoors.
✅ HRC 40-50 hardened teeth — handles dust abrasion. Unhardened teeth wear rapidly in sandy conditions.
✅ Precision bore for vibration-free PTO operation — loose bores damage tractor shafts during peak harvest.
Tractor sprockets are located on PTO-driven implement shafts, front-end loader chain drives, and track-type undercarriage drive systems. The sprocket on the PTO output shaft or implement gearbox engages roller chain to drive seed drills, fertiliser spreaders, slashers, and other chain-driven attachments. In tracked tractors, the drive sprocket engages track links to propel the machine.
Key locations: PTO output, implement drive shaft, loader chain, undercarriage. 기능: Transfer engine power to agricultural implements and ground drive.
OEM: Compatible with John Deere*, Case IH*, New Holland*, Kubota*, Massey Ferguson* tractor and implement chain drives.
*Compatibility reference only.
선택하다: Match chain pitch → measure shaft bore → tooth count for speed → zinc for outdoor.
Install: Disengage PTO → remove implement chain → swap sprocket → align → tension → lubricate → test at low PTO speed.
Issues: Rapid wear = dust ingress (improve guarding). Chain jumping = elongated chain (replace both). Noise = dry chain (lubricate). Vibration = loose bore (check keyway fit).
Moree, NSW: “Zinc-plated #60 sprockets on our JD seeder. Survived two dusty seasons. No rust.” ★★★★★
Dubbo, NSW: “#50 on our feed mixer. Hardened teeth handling grain dust abrasion. Good value.” ★★★★★
Toowoomba, QLD: “Replacement sprockets for our Case IH implements. Dimensional match was perfect.” ★★★★☆
Geraldton, WA: “#80 on our front-end loader chain. 4140 steel handling the shock loads.” ★★★★★
Murray Bridge, SA: “Bulk order for our fleet. Consistent quality across 50+ sprockets.” ★★★★★
Agricultural Chains
텐셔너
✅ ISO 9001 ✅ ANSI/ISO ✅ Zinc-plated standard | Ever-Power: 15+ yrs, agricultural range, Aus delivery.
Paper and Fabric Finishing Equipment Paper and fabric finishing sprockets drive the chain mechanisms in…
Material Cutting Machinery Material cutting machinery sprockets drive the feed mechanisms in shearing machines, slitting…
Coil Handling Machinery Coil handling sprockets drive the chain conveyors and turnstile mechanisms that transport…
Sawmill Equipment Sawmill sprockets drive log deck chains, carriage feed mechanisms, debarker conveyors, and timber…
Bulk Material Mining Conveyors Bulk material mining conveyor sprockets drive the primary and secondary conveyor…
Earthmoving Equipment Earthmoving equipment sprockets drive the track chains, bucket mechanisms, and conveyor systems on…