Product Description
higher performance granuale bucket elevator
Introduction
THG/TDG Higher Productive Bucket Elevator is the upgraded from TH/TD bucket elevator. Bucket elevator is composed of sprocket/drum, chain/belt, pushed system, head area, center casing and tail section and so forth. Large Effective Bucket Elevator can be commonly utilised in numerous industries these kinds of as mining, mineral, chemical, agriculture, power, foodstuff and other industries etc.
Rewards and Characteristics
one. Successful bucket elevator machine with massive ability, large lifting height.
2. With sorts of buckets, to meet the requirement of various kinds of materials.
3. THG bucket elevator adopts alloy steel ring chain, following area treating and heat managing, moderate hardness, large energy, far better CZPT resistance.
4. TDG bucket elevator adopts steel wire rubber belt, good toughness, higher strength.
5. Head, tail parts and center housing instances with great sealing, no material and dust leaked, with no air pollution.
six. With holdback to stop materials backflow when shut down in an crisis.
seven. Bottom adopts counter bodyweight take-up device, make itself automatic just take-up, to steer clear of belt track slip or chain take off.
eight. Enhance speed handle sensor and mechanical amount detector, it is matched by customized.
nine. Motor brand can be domestic or imported: Yutong, Shuangyu, ABB, Siemens, WEG etc
ten.Bearing manufacturer can be domestic or imported: C&U, LYC, HRB , WZS, FAG, NSK, CZPT and so forth.
Technical Parameter:
| TDG Belt Bucket Elevator(with Sh bucket)Complex Parameters Table | |||||||||||
| Main Technical Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
| a hundred and sixty | two hundred | 250 | 315 | four hundred | 500 | 630 | 800 | a thousand | 1250 | 1600 | |
| Ability Q(m³/h) | 32 | forty five | seventy two | one zero one | 158 | 220 | 348 | 492 | 788 | one.22 | 1541 |
| Bucket Quantity /L | two.six | 4 | 7 | ten | sixteen | 25 | 40 | sixty four | 102 | 161 | 255 |
| Pitch of Buckets /mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
| Bodyweight of traction belt&bucket per meter(kg/m) | 22 | 21.five | 33 | 33.2 | forty two.two | 62.three | 78.53 | 106 | one hundred forty five | 155.five | 223 |
| Running Pace v/(m/s) | one.2 | 1.two | one.34 | 1.34 | one.5 | 1.5 | 1.68 | one.65 | 1.86 | one.86 | one.836 |
| Lifting top max/m | 80 | 80 | eighty | eighty | 80 | eighty | 80 | eighty | 80 | 80 | eighty |
| Note:the capability in the table is calculated in accordance to 75% of the fill element. | |||||||||||
| TDG Belt Bucket Elevator(with Zh bucket)Specialized Parameters Desk | |||||||||||
| Main Specialized Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
| one hundred sixty | 200 | 250 | 315 | four hundred | five hundred | 630 | 800 | one thousand | 1250 | 1600 | |
| Capacity Q(m³/h) | 24 | 31 | fifty one | seventy four | 118 | 167 | 253 | 361 | 571 | 816 | 1112 |
| Bucket Volume /L | one.9 | two.nine | 4.six | 7.four | 12 | 19 | 29 | forty seven | seventy four | 117 | 184 |
| Pitch of Buckets /mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
| Fat of traction belt&bucket for every meter(kg/m) | 22 | 21.five | 33 | 33.2 | 42.two | sixty two.three | 78.53 | 106 | 145 | one hundred fifty five.5 | 223 |
| Managing Speed v/(m/s) | one.two | 1.two | 1.34 | one.34 | 1.5 | one.5 | one.68 | one.sixty five | one.86 | 1.86 | one.836 |
| Lifting top max/m | eighty | eighty | eighty | 80 | eighty | 80 | 80 | eighty | 80 | eighty | eighty |
| Be aware:the ability in the desk is calculated in accordance to seventy five% of the fill factor. | |||||||||||
| THG Bucket Elevator(with Sh bucket)Complex Parameters Table | |||||||||||
| Main Complex Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
| 160 | two hundred | 250 | 315 | four hundred | five hundred | 630 | 800 | 1000 | 1250 | 1600 | |
| Potential Q(m³/h) | 30 | 50 | 70 | 100 | 160 | 210 | 350 | 475 | 715 | 1120 | 1550 |
| Bucket Quantity /L | two.6 | four.1 | 6.5 | 10 | 16 | 25 | 40 | 64 | 102 | 161 | 255 |
| Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
| bodyweight of traction chain & bucket per meter(kg/m) | 31 | 31.85 | 33.four | forty three.25 | 60.9 | seventy nine.6 | 88.66 | 107 | 150 | 187.6 | 233 |
| Running Speed v/(m/s) | 0.93 | .93 | 1.04 | 1.04 | one.17 | one.17 | 1.32 | one.31 | one.47 | one.47 | one.47 |
| Lifting height max/m | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 55 | 55 | 40 | 40 |
| 1. Filling issue ψ=1 2. Bucket volume=Quantity of entire h2o 3. Optimum lifting peak = axis length of bucket elevator | |||||||||||
| THG Bucket Elevator(with Zh bucket)Specialized Parameters Desk | |||||||||||
| Main Specialized Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
| 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | a thousand | 1250 | 1600 | |
| Potential Q(m³/h) | 21 | 33 | 45 | 74 | 120 | 160 | 250 | 345 | 520 | 810 | 1110 |
| Bucket Quantity /L | one.9 | 2.9 | four.6 | seven.4 | 12 | 19 | 29 | 47 | 74 | 117 | 184 |
| Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
| fat of traction chain & bucket per meter(kg/m) | 31 | 31.85 | 33.4 | forty three.25 | 60.9 | 79.6 | 88.66 | 107 | 150 | 187.6 | 233 |
| Operating Speed v/(m/s) | 0.93 | .93 | 1.04 | one.04 | 1.17 | one.17 | 1.32 | one.31 | one.47 | one.47 | one.47 |
| Lifting peak max/m | 75 | 75 | seventy five | 75 | 75 | 75 | 75 | 70 | 70 | 55 | 55 |
| 1. Filling aspect ψ=1 2. Bucket quantity=Quantity of complete h2o 3. Greatest lifting top = axis distance of bucket elevator | |||||||||||
Choice Conditions
| ♦Material to be processed: _____ | ♦Material is corrosive or not: ____ (Ps. Indeed or No) |
| ♦Handling potential (Ps. It signifies the total | ♦Working setting is indoor or out of doors:________ |
| materials ability feeding from the inlet): _____t/h | ♦Material is liquid or not:___________(Ps. Sure or No) |
| ♦Bulk Density: _____t/m3 | ♦Working setting temperature: _______ ºC |
| ♦Lifting top of the elevator (distance amongst | ♦Upstream products (Ps. It indicates what variety of |
| inlet and outlet):__________m | tools is used to feed the substance): _____ |
| ♦Max. granule size of the feeding materials: ____mm | ♦Downstream equipment (Ps. It signifies what kind of |
| ♦Percentage of Max. granule in substance:_________% | products is employed to discharge the material): _____ |
| ♦Material temperature: _____ºC | ♦Working power source: _____V ______HZ |
| ♦water content:____% |
We mainly offer the adhering to toolss :
| Vibrating Screen | Rotary vibrating display |
| Ultrasonic vibrating display screen | |
| Gyratory monitor | |
| Trommel monitor | |
| Linear vibrating screen | |
| Circular vibrating monitor | |
| Dewatering screen | |
| Vibrating feeder | |
| Belt Conveyor | Belt conveyor |
| Sidewall belt conveyor | |
| Moveable belt conveyor | |
| Shuttle conveyor | |
| Tripper | |
| Bucket Elevator | Productive bucket elevator |
| Belt bucket elevator | |
| Ring chain bucket elevator | |
| Plate chain bucket elevator | |
| Cement bucket elevator | |
| Silo bucket elevator | |
| Screw Conveyor | U-type screw conveyor |
| Cement screw conveyor | |
| Pipe screw conveyor | |
| Scraper Conveyor | Horizontal scraper chain conveyor |
| Incline scraper chain conveyor | |
| Grain scraper chain conveyor |
System functionality is very dependent on the interaction of the sprockets, which signifies that the sprockets you pick drive the achievement of your operation. Make the proper and effortless decision with ep’s sprockets. Tsubaki supplies chain and sprocket producing capabilities. The chain meshes nicely with the sprockets for prolonged support life and reputable efficiency. This means extended-term financial savings and genuine price for your operations. Minimize servicing downtime, improve productiveness and decrease substitution fees
Ep prefabricated metal sprockets are manufactured of C1045 steel, induction hardened or heat-handled metal, 400 – five hundred BHN hardness. You should specify the resources you require. Unless of course or else asked for, the outside diameter of the hub need to be adequate to accommodate the needed holes and keyways. Keys to these items are not provided unless requested or installed on the shaft. Split sprockets for welding or split sprockets for bolts offer an economical way to put in sprockets on shafts the place elimination of the shaft assembly is prohibited. Several dimensions of sprockets are geared up with holes, keyways, and set screws. Discs or partly finished sprockets are also stocked. For prolonged sprockets and idlers, specify the chain dimension employed.
