Name: Best ANSI #50 Roller Chain Sprocket Australia Manufacturers, suppliers, factory - drivensprockets
SKU: 835d9fb3af7a

Descrição

Roda dentada para corrente de rolos ANSI #50

Medium-Duty 5/8″ Pitch for Conveyor, Agricultural, and Manufacturing Drives

The #50 at 5/8 inch (15.875mm) pitch fills the gap between lighter #40 and heavier #60, providing increased load capacity while maintaining moderate sprocket diameters. Widely used on conveyor head drives, agricultural feed systems, pump chain drives, and manufacturing line mechanisms. Simplex (#50), duplex (#50-2), triplex (#50-3) from 9 to 120 teeth.

ANSI #50 sprocket

Specifications

Parameter	#50	#50-2	#50-3
Pitch	5/8″ (15.875mm)	15.875mm	15.875mm
Roller	0.400″ (10.16mm)	10.16mm	10.16mm
Width	3/8″ (9.53mm)	9.53mm	9.53mm
Teeth	9 – 120T	9 – 120T	9 – 100T
Standard	ANSI B29.1	ANSI B29.1	ANSI B29.1

Features

▶ 60% more load capacity than #40 simplex in single-strand configuration

▶ Induction hardened teeth HRC 40-50 for extended wear life

▶ CNC hobbed tooth profiles, 0.025mm TIR bore, broached keyways

▶ A-plate, B-hub, C-hub, taper-lock, QD bushed, and split hub available

▶ 1045 steel, SS304, SS316, cast iron, nylon material options

▶ EN 10204 Type 3.1 material certificates. ISO 9001:2015 certified.

Applications

Agriculture: Harvester headers, grain augers, feed conveyors — where #40 capacity is insufficient.

Conveyors & Pumps: Medium-duty conveyor head drives, pump chain couplings, mixer agitator drives.

Reviews

“#50 duplex on our grain elevator runs perfectly. Hardened teeth handling the abrasive grain dust well.” ★★★★★ — Ops Mgr, Dubbo, Australia

“Upgraded from #40 to #50 on our packaging line main drive. Eliminated the overload trips we were experiencing.” ★★★★★ — Maint Eng., Brisbane, Australia

“Taper-lock #50 sprockets for pump drives. Easy installation, running true.” ★★★★☆ — Plant Eng., Manila, Philippines

“SS304 #50 for our beverage bottling conveyor. Clean finish, no corrosion after 14 months washdown.” ★★★★★ — QA Mgr, Nairobi, Kenya

“Consistent quality #50 supply. Used across our manufacturing operations.” ★★★★★ — Procurement, Auckland, New Zealand

FAQ

#50 vs ISO 10B?

Both 15.875mm pitch with identical roller diameter (10.16mm). However, internal widths differ slightly. Verify all dimensions before interchanging.

When to choose #50 over #40 duplex?

#50 simplex provides similar capacity to #40 duplex in a narrower hub. Choose #50 when shaft width is limited or single-strand simplicity is preferred.

Split hub available?

Yes. Split #50 sprockets for chain-on replacement in common tooth counts.

Surface treatment for outdoor use?

Zinc plating for moderate outdoor exposure. Zinc-nickel for coastal. Hot-dip galvanise for severe weather.

MOQ?

One piece. Extensive #50 stock for rapid dispatch.