Tag Archives: automatic machine

China OEM Qtj4-35 Semi Automatic Hollow Block Making Machine, Brick Making Machine with Great quality

Product Description

Introduction:

Adopting 4-prospects guiding technique ,with large sturdy vibration motor and employing equally compression of the higher and the bottom CZPT improve the productivity and high quality, at the exact same time can adapt to the various kinds of materials for numerous blocks. 

Primary technological specification:

Molding parts   390mm×190mm×190mm   4pcs/mold
  390mm×240mm×190mm   3pcs/mold
  390mm×120mm×190mm   6pcs/mould
  240mm×115mm×53mm  21pcs/mold
 
 (Notice:The mould according to your necessity)
Molding cycle   35s/time
Vibration frequency
 
frequency
  2800rpm
Productiveness   2000-2500 pcs/working day(depend by quantity of for each mildew)
Interesting power   28KN
Power   9.7KW(Total electrical power in the subsequent webpage)
Vibration sort   Platform vibration
Pallet size   850mm×460mm×40mm(thirty)mm

 

Composition:

QTJ4 – 35 sort electric block forming device, the host can be operated independently, also can be equipped with a belt conveyor, a pipeline 
mixer. The host includes a vibration resource, transmission, lifting, pushing, hopper, die electrical control box technique.
 
Lifting program: compose of cycloid pin motor, sprockets, raise arm, axle sleeve and hanging pin, positioning pin.
the cycloid pin motor with 1.5 kilowatt pushed spindle at the two finishes of crank arm. Elevate and decrease the mold in parallel driven by the raise arm, The upper mildew and beam hanging by the two sides, balanced in the positioning plate. Hanging from the upper mold.make higher mildew depart the molding box smoothly.
Vibration method: under vibration compose of 2 established vibrator blend with 3KW. vibration previously mentioned fashioned by a 1.5KW vibrator up and down.
 

Raw substance :

QTJ4 – 35 kind block equipment incorporate regular concrete and lightweight concrete raw resources, can use river sand, mechanism sand, gravel, crushed stone, slag, stone and other supplies. Meanwhile,it can also use cinder, fly ash, pumice stone, ceramic, perlite, shale and other materials, vast suitability, as lengthy as the uncooked resources with the electricity electrical power, it can be created.
 

Basis Drawing:

Our Manufacturing facility Present :

ZheJiang Xihu (West Lake) Dis.fengshuanglong Equipment Co.,Ltd  is a chinese producer of dedicated equipment for development content and blocks.Our factory provides complete creation traces for concrete blocks and brick creating equipment.Our factory was launched in 1990 calendar year.We are proudly owning 36 units new sophisticated machine instruments,avanced massive scale assembling line for concrete block equipment,higher precision fabrication centre with precise orientation ,excellent producing craft and skill and rigid quality control.These assures our Xihu (West Lake) Dis.feng machinery with substantial quality and performance.Our manufacturing unit has the manufacturing background more than twenty years.With our persistent persuit of very first -course technology and initial-class quality think our factory will offer you a lot more relibale and perfect equipment.Searching ahead to far more close friends and clientele from the whole world to occur and visit our manufacturing facility for extended term cooperation.Thank you!


 
 
 

 

The teeth of a single pitch sprocket mesh with one tooth for each sprocket. Double pitch sprockets seem like one pitch sprockets, but the chain only meshes with the other tooth. This signifies that a double-pitch sprocket has the identical quantity of enamel as a single-pitch sprocket, but only half of the teeth are engaged with the chain. The major big difference is that the double pitch sprockets are reduce with a particular pitch circle diameter for optimal engagement. For ep roller chains, the sprockets are the same if the number of tooth is 32 or much more for solitary and double chains.
Over time, the sprocket teeth wear out due to friction induced by the continuous physical speak to among the sprocket tooth and the sprocket. ep manufactures wise tooth sprockets with put on indicator pins. These visual dress in indicators notify operators and inspectors when sprockets are nevertheless functioning properly and when they need to be replaced.

China OEM Qtj4-35 Semi Automatic Hollow Block Making Machine, Brick Making Machine     with Great quality

China Standard Automatic 5 Gallon 20L 19L Mineral Pure Drinking Water Filling Machine Bottling Production Line wholesaler

Merchandise Description

three~5 Gallon Barreled H2o Rinsing Filling Capping Device

Generation Description
The equipment is created and made by our business. It is for washing filling and capping for barreled drinking water. It has stable functionality, advanced technologies, gorgeous form and comprehensive functions.

 

Technological Features

According to its perform, composition and manage mode, QGF600b automatic barreling production line is divided into washing portion, filling portion, capping portion, conveying component and loading component.
The body of the device is welded by stainless steel square tube, which has the attributes of substantial power, great rigidity, gentle excess weight, beautiful visual appeal and effortless cleansing.
The generate chain is composed of lively and passive sprocket, chain, bucket holder, bucket holder, etc. the chain and sprocket are cautiously designed to be much more scientific and best.
In the principal travel, the sprocket shaft is pushed by the reduction motor, and 4 induction columns are installed on the sprocket. The placement of each induction column is evenly distributed by the quantity of teeth, so as to guarantee the precise positioning of the complete computerized procedure. The equipment flushing CZPT is produced of stainless steel pipe. The nozzle adopts the nozzle of American spray organization. The bottle washing effect is good CZPT leaving lifeless angle for effortless disassembly and cleaning. The gear adopts lifting nozzle to make certain no useless angle. It has the purpose of stopping washing when there is no bucket.
There are 4 high temperature lye drinking water tank, 2 disinfectant water tanks and circulating drinking water tank. Each and every h2o tank is equipped with a liquid adding funnel and is also utilised as a filter. The h2o tank is geared up with a hand hole from which the drinking water tank can be cleaned. The funnel is geared up with a layer of 100 mesh leaky internet, which can be changed and cleaned for the duration of procedure CZPT influencing the normal procedure of the device. The include plate of the funnel is openable, which can keep an eye on the water level in the water tank. The h2o tank is presented with an overflow port. When there is too considerably drinking water, it can overflow by way of the overflow port.
The bucket is immediately loaded by air cylinder. The bucket dropping system connects the bucket plate at the slipping position, so that the barrel can tumble stably. The bucket plate is pushed from the inclined angle of 45 ° to the vertical see of the bucket mouth underneath the action of the air cylinder, and the filling valve fills by way of the falling place of the air cylinder.
There is an exhaust hood on the best of the major motor to exhaust the harmful odor to the exterior via the exhaust technique, so as to lessen the odor in the filling place, which is useful to human wellness.
The barrels soon after filling are despatched to the gland by the conveyor chain. The filling and capping station is composed of a filling valve, drinking water inlet pipe, cap sorting device, cap-donning box, and crawler capping.
When the bucket reaches the filling valve, the filling cylinder acts and commences the filling valve to fill. When the bucket is full, the filling valve functions, the filling cylinder returns and the bucket moves ahead. The filling valve utilised in this gear is developed with 2 interfaces of liquid inlet and air outlet. When the water in the bucket is crammed to a certain top, the filling valve acts to end filling. The filling time can be altered. After filling, the h2o inlet solenoid valve is closed very first, and then the filling valve is lifted to keep away from spraying when the standard filling valve is lifted.
The cap adjuster is mostly composed of motor CZPT disc, cap pipe and hopper. The purpose of the cap adjuster is to push the caps in the hopper into the cap pipe by means of its motor CZPT disc. It makes the caps in the pipe confront down by means of a certain mechanism, and arrangesthe caps in a distinct purchase.
When the bottle cap slides again to the capping placement, the capping unit will include the bucket. The masking drive is decided by the elastic pressure of the spring, which can be altered by changing the spring compression bolt. The top of the include placement can be modified by altering the pull rod in the middle of the spring.
Undertake domestic superior technological innovation of covering and hanging, and adopt crawler masking method. It has the operate of halting when there is no cover.
There is no concluded drinking water tank in the host. As an alternative, the terminal method of the drinking water remedy products is geared up with a filling pump and a cleansing pump, which are connected to the filling and cleaning reserved ports of the bucket filling device via 2 pipelines. It ensures that the completed aseptic h2o is always loaded below airtight conditions. It avoids secondary air pollution caused by the set up of finished h2o tanks in the host.

Manufacturing Parameters
 

Merchandise QGF600B
Capability(Bottles/h) 600
Bucket Specificaiton 3 Gallon or 5 Gallon
Filling Volume 3 Gallon eleven.355 Liters
five Gallon 18.925 Liters
Water Usage three Gallon(Total 13.2 t/h) The flushing drinking water is 6.4 t/h
5 Gallon(Whole 17.8 t/h)
Total Energy(KW) Primary Motor .seventy five
Electrical power of Washing .seventy five*4=three
Energy of Cap Adjuster .two
Electric powered heating 5*3=fifteen
Functioning Stress 0.6MPa
Consumption of Air 0.5m³/min
Exterior Dimensions(mm) 5255×4045×2335
Fat(t) 3.five
Washing Process and Time 24s for procedure and flushing on each and every station
Drain Once
Large temperature alkaline h2o flushing Twice
Circulating drinking water flushing 2 times
Drain Once
Disinfectant drinking water flushing 4 occasions
Sterile water flushing Twice
Drain Once

 

Specialized Parameters

 

No. Item Business Normal Our Regular
1 Price of bucket jamming(Loading) ≤1% ≤0.8%
2 Washing Location one hundred% one hundred%
3 Price of bucket jamming(Unloading) ≤1% ≤0.8%
four Filling Material Reduction Price (excluding h2o washing for completed items) ≤4% ≤3%
5 Filling Precision (volume) ±3% ±2%
6 Experienced Price of Filling ≥98.5% ≥99%
seven Competent Rate of Sealing ≥98% ≥99%
eight Competent Charge of Completed Products ≥97% ≥98%

Competitive Edge
1. Our equipment is with good high quality and price, we can make the device personalized for you if want.
two. Our business has been set up far more than 15 several years. We are a specialist producer in each type of CZPT manufacturing machine.
3. We have the certifications of ISO, CE and so on.
4. Our company devices are exported to several international locations abroad each and every calendar year.
five. We can provide free technician support and consultation to assist you to purchase a new gear and start off a new organization.
6. We can supply 1 year ensure for the device you requested freely, eternally engineering supports in our machine and relevant machine.
7. W can ship our technician to your region for device commissioning and instruction conveniently.
8. Your inquiry will be replied inside 24 hrs, you are welcome to speak to me in your usefulness, make sure you really feel free of charge to make contact with me if any question you have.

Package deal and Shipment

Relevant Items We Can Supply:
1.Water Therapy Technique (H2o Filtration)
two.Bottle Blowing Equipment (Producing plastic bottles)
three.Air Conveyor (Transportation vacant bottles)
four.Water Filling Machine (Filling drinking water into bottles) 
5.Cap elevator (Transportation cap)
six.Blow dryer (Blow dry h2o)
seven.Flat Express (Transport bottle)
8.Code Sprayer (Printing the day on the bottle water) 
9.Labeling Machine (Labeling in bottled water)
10.Bottle Shrink Wrapping Device (deal the bottle water) 

 

Technique functionality is extremely dependent on the conversation of the sprockets, which signifies that the sprockets you decide on generate the success of your procedure. Make the proper and effortless decision with ep’s sprockets. Tsubaki provides chain and sprocket producing capabilities. The chain meshes effectively with the sprockets for lengthy services lifestyle and reliable functionality. This implies long-term cost savings and genuine benefit for your operations. Lessen maintenance downtime, boost productiveness and lessen replacement costs
System performance is hugely dependent on the interaction of the sprockets, which means that the sprockets you pick travel the success of your procedure. Make the correct and straightforward option with ep’s sprockets. Tsubaki gives chain and sprocket producing abilities. The chain meshes effectively with the sprockets for lengthy support daily life and dependable overall performance. This implies long-expression cost savings and real value for your functions. Decrease routine maintenance downtime, enhance productivity and minimize substitution expenses

China Standard Automatic 5 Gallon 20L 19L Mineral Pure Drinking Drinking water Filling Device Bottling Creation Line     wholesaler

China wholesaler Fully Automatic Metal Roof Sheet Roll Forming Machine with Great quality

Merchandise Description

This Generating Process Sketch As Underneath Image:

This Profile Drawing As Underneath Photograph:

 

Standard Parameter

1 Product Parameters
two Model NO. YX29-two hundred-one thousand
3 Content Pre-painted galvanized sheet
four Thickness .35-.8 mm
five Produce Power 550 MPa
six Feed Width 1220 mm
7 Successful width a thousand mm
eight Roll Phases twenty Levels
9 Shafts Diameter ф75/ninety five mm
10 Principal Motor Power 11 KW
11 Hydraulic Team Electrical power 5.5 KW
  Max Line pace of roll Previous Approx. 20-25m/min
thirteen Electric powered Common In accordance to regional voltage

 

 

Machine Parts

A.  10TON*1250MM HYDRAULIC UN-COILER WITH COIL Car

Hydraulic system to grow coil inner gap, Pump motor: 5.5KW
Taper wedge increase kind
Double stage increasing palms with 2 coil bore variants of 480-530 and 580-63
Load Ability: Max. 10 Tons Coil Width Max. 1250mm
Coil Outer-diameter Max. 1500mm
Retarding Motor to switch the coil, Motor: 5.5KW
Maintain arm on the leading, to stay away from coil become unfastened when end to be packed. 
The arm to be pushed by pneumatic cylinder, handbook control
The air supplier must be supply by the consumer
With coil car 
Up/Down stroke of Coil Automobile: Max. 450mm
Forward/backward stroke of Coil Auto: Max. 2000mm

B.  Entry roller & Manual Pre-shearing gadget           Un-powered             
Intelligent minimize handle, to minimize off the stop of the closing piece of sheet only
Operating thickness up to .8mm

 

CPolythene Movie-on Device    
Un-run film-on device to protect plastic movie on the floor of sheet 

D.   Cold Rolling Mills
Feeding section with information
Equipment/Sprocket driving twenty-step to type
New stand frame style
Rollers produced from forty five#, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75/95mm, Precision Machined
Major motor =eleven KW, Frequency velocity control
Max Line pace of roll Former: Approx. twenty-25m/min            
Safety Mesh Go over (entire mesh variety) Over Roll-former To Avoid Palms Go Inside

E.  Hydraulic Chopping System
Cease to cut, Publish minimize, No Blanking minimize
Reducing resource materials : Cr12, Heat treatment method
Pump motor =5.5KW

F.   PLC Management System
       Control the quantity & chopping length instantly
       Combined with: PLC, Contact Screen, CZPT (SIEMENS), Encoder (Omron), Distant Management and so forth
       Cut-to-length tolerance≤±2 mm
       Control Voltage 24V

G. ten METERS PNEUMATIC STACKING PALLET
Stacking Duration Max. ten meters
Pile up the sheet soon after slicing automatic.
Outfitted with a bottom pallet to be pull out by motor pushed
Help arm motion in vertical direction, pushed by pneumatic program
Action managed by Pneumatic program.
The air source presented by the person

 

 

 

Right after-Sale Support

In proper operation & sustaining, the device is confirmed for 1 yr given that leaving our manufacturing unit excludes the electric elements.
Set up:
If set up is essential, WE will dispatch a technician to the buyer’s manufacturing unit abroad to aid regulating the equipment with charge free of charge. The consumer must support US to get the Chinese technician’s visa and must spend for the roundtrip air ticket and the regional lodging.
If set up is needed, the buyer shall make the adhering to preparing just before arrival of professionals.
 

Conditions Of Trade

one.Deal & Shipment: Facility water-evidence packing, Management cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit inside of a week considering that the deal signing day.70% payment by T/T is needed before the equipment be send out out of factory.

Over time, the sprocket teeth use out thanks to friction brought on by the continuous physical get in touch with amongst the sprocket enamel and the sprocket. ep manufactures wise tooth sprockets with put on indicator pins. These visible use indicators inform operators and inspectors when sprockets are even now doing work properly and when they need to have to be replaced.
Hold your technique on the cutting edge with ep sprockets and find out different quality manufacturers. Ep sprockets are higher-top quality heat-dealt with steel to face up to large shock loads, resist wear and offer a lengthy services existence. Alloy and stainless metal sprockets are also obtainable for additional corrosion resistance and meals-grade purposes

China wholesaler Fully Automatic Metal Roof Sheet Roll Forming Machine     with Great quality

China Best Sales New Design Qtj4-40 Semi Automatic Hydraulic Brick Block Making Machine with high quality

Product Description

Introduction:

Adopting 4-sales opportunities guiding technique ,with higher strong vibration motor and employing both compression of the upper and the base CZPT enhance the productiveness and top quality, at the very same time can adapt to the different kinds of content for various blocks. 

Primary complex specification:

Molding pieces   390mm×190mm×190mm   4pcs/mildew
  390mm×240mm×190mm   3pcs/mildew
  390mm×120mm×190mm   6pcs/mildew
  240mm×115mm×53mm  21pcs/mould
 (Observe:The mould according to your requirement)
Molding cycle   40s/time
Vibration frequency   2800rpm
Efficiency   2000-2500 pcs/working day(rely by amount of for each mildew)
Thrilling electrical power   28KN
Energy   9.7KW(Overall electrical power in the next website page)
Vibration form   Platform vibration
Pallet measurement   850mm×460mm×40mm(thirty)mm

 

Framework:

QTJ4 – 35 kind electric block forming equipment, the host can be operated independently, also can be outfitted with a belt conveyor, a pipeline 
mixer. The host contains a vibration source, transmission, lifting, pushing, hopper, die electrical handle box technique.
 
Lifting program: compose of cycloid pin motor, sprockets, elevate arm, axle sleeve and hanging pin, positioning pin.
the cycloid pin motor with 1.5 kilowatt pushed spindle at the two ends of crank arm. Raise and lower the mildew in parallel pushed by the elevate arm, The upper mildew and beam hanging by equally sides, balanced in the positioning plate. Hanging from the upper mould.make higher mold depart the molding box efficiently.
Vibration system: under vibration compose of 2 set vibrator mixture with 3KW. vibration over formed by a 1.5KW vibrator up and down.
 

Raw materials :

QTJ4 – 35 variety block equipment include standard concrete and lightweight concrete uncooked components, can use river sand, mechanism sand, gravel, crushed stone, slag, stone and other components. In the meantime,it can also use cinder, fly ash, pumice stone, ceramic, perlite, shale and other materials, wide suitability, as extended as the uncooked resources with the electricity electric power, it can be created.
 

Basis Drawing:

 
 

 

 

 

 

 

Sprockets are toothed, profiled wheels that mesh with the chain to transmit motion. Our sprockets are custom fabricated substantial-power aluminum, black anodized for excellent functionality. Flat sprockets contain ep styles and are suitable with all other parts. Blade Sprockets are 6061-T6 Aluminum Hub Sprockets are 7075-T6 Aluminum Enamel Laser Compatible #25 or #25H Roller Chains Engraved On Each Sprocket Now Easy To Use With Our Chain Tube By means of Pipe
Over time, the sprocket tooth wear out owing to friction caused by the consistent actual physical speak to amongst the sprocket enamel and the sprocket. ep manufactures sensible tooth sprockets with wear indicator pins. These visible put on indicators tell operators and inspectors when sprockets are even now operating securely and when they require to be changed.

China Best Sales New Design Qtj4-40 Semi Automatic Hydraulic Brick Block Making Machine     with high quality

China Hot selling 4-40 Semi Automatic Concrete Brick/Block Machine Production Line with Hot selling

Solution Description

Introduction:

Adopting four-sales opportunities guiding technique ,with large sturdy vibration motor and making use of the two compression of the higher and the base CZPT increase the productivity and top quality, at the exact same time can adapt to the various types of materials for a variety of blocks. 

Primary specialized specification:

Molding items   390mm×190mm×190mm   4pcs/mould
  390mm×240mm×190mm   3pcs/mold
  390mm×120mm×190mm   6pcs/mold
  240mm×115mm×53mm  21pcs/mold
 (Observe:The mould in accordance to your need)
Molding cycle   40s/time
Vibration frequency   2800rpm
Productivity   2000-2500 pcs/day(rely by amount of per mildew)
Exciting electrical power   28KN
Energy   9.7KW(Whole power in the following web page)
Vibration form   Platform vibration
Pallet measurement   850mm×460mm×40mm(30)mm

 

Structure:

QTJ4 – 35 sort electric block forming machine, the host can be operated independently, also can be geared up with a belt conveyor, a pipeline 
mixer. The host comprises a vibration resource, transmission, lifting, pushing, hopper, die electrical handle box system.
 
Lifting program: compose of cycloid pin motor, sprockets, lift arm, axle sleeve and hanging pin, positioning pin.
the cycloid pin motor with 1.5 kilowatt pushed spindle at the two finishes of crank arm. Raise and reduced the mildew in parallel pushed by the elevate arm, The upper mildew and beam hanging by both sides, balanced in the positioning plate. Hanging from the upper mold.make upper mold go away the molding box efficiently.
Vibration technique: below vibration compose of 2 established vibrator blend with 3KW. vibration previously mentioned fashioned by a 1.5KW vibrator up and down.
 

Raw substance :

QTJ4 – 35 type block machine consist of standard concrete and light-weight concrete raw materials, can use river sand, mechanism sand, gravel, crushed stone, slag, stone and other materials. In the meantime,it can also use cinder, fly ash, pumice stone, ceramic, perlite, shale and other components, vast suitability, as prolonged as the uncooked components with the power electricity, it can be made.
 

Foundation Drawing:

 

 

 

 

 

Sprockets are toothed, profiled wheels that mesh with the chain to transmit motion. Our sprockets are custom made fabricated high-energy aluminum, black anodized for superior functionality. Flat sprockets include ep styles and are appropriate with all other components. Blade Sprockets are 6061-T6 Aluminum Hub Sprockets are 7075-T6 Aluminum Tooth Laser Compatible #twenty five or #25H Roller Chains Engraved On Each Sprocket Now Easy To Use With Our Chain Tube Via Pipe
Bushing Sprockets: Bushing sprockets can simplify chain technique maintenance by replacing only worn sprocket assemblies, whilst the bushings can still be reused. The bushing also has a tightly tapered mating area that can transmit greater torques than basic essential elements. Shut-fitting surfaces provide greater overall performance in programs with heavy begin/stop functions or shock loads.

China Hot selling 4-forty Semi Automatic Concrete Brick/Block Device Generation Line     with Sizzling promoting

China Hot selling 2137 Widely used automatic wire coil tension pay off machine cable wire prefeeding machine Spool wire pay-off machine with Best Sales

Item Description

 

Item Description

CP-1035 Cable Prefeeder

Product Parameters

Model

CP-1035

CP-1040

CP-1045

Wire diameter

three-20mm

3-20mm

3-20mm

Wire tray size

OD four hundred-630, width 250-five hundred

OD five hundred-800, width 300-600

OD 600-one thousand, width 450-750

Max load fat

1000kgs

1000kgs

1000kgs

Max. feeding velocity

250m/min

250m/min

250m/min

Feeding motor energy

two.2KW

4KW

4KW

N.W.

550kgs

550kgs

600kgs

Energy offer

220V/110V/50HZ/60HZ

Application

Primarily appropriate for the huge sq. cables such as new vitality wire , charging pile cables, energy cables, photovoltaic wire, BV cable, and so on.

Feeding method

Shaftless power pay-off, frequency converter routinely controls pay out-off pace, automatic wire feed, computerized shutdown

This series of spend-off racks are suited for automatic pay out-off of the end processing of new energy car wires, massive sq. sheathed cables, and many others.

 

1. Rigidity wheel: The pressure wheel is divided into an upper fastened wheel group (3 pieces) and a decrease moving wheel group (2 pieces). The diameter of the rigidity wheel is 250~500mm.
2. Speed opinions: When the pc wire stripping machine is operating, the stress wheel moves with it, and the potentiometer is pushed by the sprocket to rotate, and the potentiometer will opinions a sign to the CZPT to management the speed of the wire-off motor, thereby controlling the wire-off pace and The laptop wire stripping machine is synchronized.
3. Rigidity adjustment: According to the wire specifications, increase or decrease the weight on the chain to alter the rigidity of the cable.
4. The total top of the rigidity frame is 2 meters, which is practical for handbook winding.

Certifications

 

Packaging & Shipping and delivery

Packaging:
 Samll dimensions equipment:  Standard carton
 Medium dimension devices: Thickened cartons and picket pallets
 Big measurement device: Plywood wooden instances

Shipping:
A. 3-5 workdays delivery from China by Air/Express(DHL,FedEx,UPS,EMS etc.)
B. 25-thirty workdays transport from China to Europe by teach. 
C. We can arrange cargo by sea. Minium CBM necessity : 1 CBM 

Business Profile

HangZhou Weijiang Automation Equipment Co., Ltd  is a CZPT technologies company specializing in processing and chopping, R&D of harness equipments.Our machines are exported to more than twenty nations and Our equipments are commonly utilised in numerous industries at home and abroad, these kinds of as photovoltaic, new strength automobiles, house appliances,industrial products, rail transit, communications and other industries.

Our principal products are :Wire tape winding equipment weries,Wire chopping stripping equipment series,Wire terminal lug crimping equipment sequence,Pipe slicing device series.In addition,our manufacturing unit settle for the R&D and creation of non-common automation equipments.Choose Weijiang,get the long term,welcome to consult us!

Our Rewards

We are 1 of the most skilled Chinese wire cable process device makers and leaders.

* Best goods and manufacturing facility price tag.
* On-time shipping and the shortest shipping and delivery time.
* 1year warranty. If our products can not operate correctly inside of 12 months, we will offer you spare elements for free and you want to pay for the supply.
OEM and personalized support.
* User manuals will go with relative machines.

QC: All goods will be checked ahead of supply.
Compensation: If any unqualified product is discovered, we will spend the compensation or deliver new qualified goods to consumers.
Upkeep & Mend: In situation of any maintenance or repair require, we’ll aid to locate out the issue and offer you relative direction.
Operation Guidance: If you have any problem with procedure, remember to come to feel free of charge to make contact with us.

FAQ

1. Why decide on us?
We offer general remedies for processing tools. Our regular products is very full, all are in stock and can be transported swiftly. We have our own products factory, which can evenly personalize products in accordance to buyer demands, this sort of as ordering various appearances and makes for brokers, and non-standard gear in accordance to client demands.

two. Should I worry about the high quality?
Ahead of shipping, we do test the machine operating issue for you.
Just take a online video of the typical procedure of the equipment to you, and then confirm the supply

three.How can I know your machine is designed for my product?
You notify us the distinct parameters of your merchandise, or you can ship us samples of your solution and we take a look at it on machine.
Video clip for you to make samples

four. How to operate the products?
My friend, don’t fret about it, we have made vedio for you, it will demonstrate you how to do it stage by phase. Make contact with our engineers at any time when you don’t understand, assist video and phone interaction

5.When the device can’t function properly,What need to I do?
The Engineer is online for 24-several hours, they can examine the problems and then give you remedy way extremely before long. Please rest confident that handbook will be supplied along with equipment,guaranteeing you can run the machine very easily.

Hold your system on the chopping edge with ep sprockets and discover diverse quality brand names. Ep sprockets are large-good quality warmth-treated steel to endure large shock hundreds, resist use and offer a prolonged service life. Alloy and stainless steel sprockets are also offered for further corrosion resistance and meals-quality apps
Hold your method on the chopping edge with ep sprockets and discover distinct top quality brands. Ep sprockets are high-top quality warmth-handled steel to face up to heavy shock hundreds, resist wear and provide a extended service lifestyle. Alloy and stainless steel sprockets are also available for added corrosion resistance and foods-quality purposes

China Hot selling 2137 Widely used automatic wire coil tension pay off machine cable wire prefeeding machine Spool wire pay-off machine     with Best Sales

China Best Sales Automatic Hand Push Corn Soybean Rice Reaper Cum Binder Harvester Machine with Best Sales

Solution Description

Automatic hand push corn soybean rice reaper cum binder harvester equipment
Description:
The wind rower consists of 2 main areas: the supporting principal equipment and the windrower. The supporting principal motor is composed of motor, transmission gearbox, frame, multi-practical handrail for controlling motion and widened tire. It is primarily employed for harvesting wheat, rice and other platycodon crops. It is appropriate for system topography and plant top of .5~1.5 meters. The diameter (downs of significantly less than 45°) is less than 4 winds and is not rainy. The energy output shaft of the wind rower is transmitted to the header transmission by way of the transmission shaft, and is transmitted to the eccentric crank slide mechanism by means of the transmission claw clutch and a pair of CZPT to drive the cutter, and is transmitted to the conveyor chain by way of the sprocket chain. The drive shaft drives the higher and lower conveyor chains. The Fuhe belt is pushed by the Fuhexing star wheel. The movement of the HangZhou star wheel is pushed by the tooth extraction of the conveyor chain.Small dimension, gentle bodyweight, low gas usage, versatile maneuverability, easy and handy operation, low labor, reduced slicing, and many others. Computerized windrower, routinely turned to 1 side.
Parameter:

Cutting width 1000mm
Continue being height ≥50mm
Placement angle 90±20
Placement way Aspect direction
Creation capability two-3.5mu/h
Energy Diesel motor 8Hp
Bodyweight 310kg
Dimension 1.4*1.4*.85

 

Sprockets are created to ISO606 and ASME B29.a hundred requirements, available in plate, solitary and double hub configurations, created from higher good quality carbon steel, optional tapered bushings simplify installation and removing, therapies obtainable upon request, like black oxide
Ep prefabricated metal sprockets are created of C1045 steel, induction hardened or warmth-handled steel, 400 – five hundred BHN hardness. Make sure you specify the materials you need. Until normally asked for, the exterior diameter of the hub ought to be ample to accommodate the needed holes and keyways. Keys to these things are not supplied unless asked for or put in on the shaft. Split sprockets for welding or split sprockets for bolts provide an affordable way to install sprockets on shafts where removal of the shaft assembly is prohibited. Several measurements of sprockets are outfitted with holes, keyways, and set screws. Discs or partly finished sprockets are also stocked. For long sprockets and idlers, specify the chain size utilized.

China Best Sales Automatic Hand Push Corn Soybean Rice Reaper Cum Binder Harvester Machine     with Best Sales

China Hot selling 1kg – 5kg Plastic Bag Fully Automatic Granule Particle Food Rice Packing Machine Price near me shop

Item Description

Item Description

Solution Description

 

This conveyer frame is made by 304 stainless steel,it is injected by food-grade plastic(PP), Driven by sprocket
and principle of transmission chain plate,The friction transmission than traditional belt is more
tough, anti-oxidation, don’t wear, big load etc. with scraper conveyor and side platens design,to ascend materials and block material on both sides of the backward leakage.

 

Sort

SD-VP520

Air consumption

.65Mpa

Bag length

80-400mm(L)

Gas consumption

.3m3/min

Bag width

150-250mm(W)

power voltage

220VAC50Hz

Max width of roll film

520mm

Energy

4KW

packing speed

5-80 bagsmin

Dimension

1440(L)X1216(W)X1796(H)mm

Measuring range

3000ml

Net weight

600kg

 

1. Feeder and bucket conveyer 

 

power 0.75KW 

conveying capacity 2.5 cubic meter /hour  

voltage 220V/380V (optional) 

GW 200Kg 

Machine dimension(mm) 4235(L)×400(W)×3546(H) 

 

two. 10 heads automatic coffee bean weigher

 

Weighing precision scope:.1% 

Hopper volume:1300ml 

Hopper form:Double row without memory

Driving mode:Stepping motor

Dimension:1150(L)X950(W)X1129(H) 

Interface:5.7 inches color LCD

voltage:220V power:1500Wfrequency:fifty/60HZrated current:9A 

Packing size (mm):1400(L)×1130(W)×1120(H)

 

Attributes:

Be available: peanut, almonds, seeds, monosodium glutamate, feed, sesame etc daily food

High precision digital weighing transducer make accurate measuring

The microcomputer control system, and adopt double vibrates to feed, import instrumentation, advanced technology,

 simple operation.

Stainless steel sealing systems,Anticorrosion measures can quickly remove,Facilitate cleaning maintenance

Good compatibility with other packing equipment

 

 

 

3. Supporting platform and shelf

 

It is like a table, Used to load weigher it is made of stainless steel.

 

four. Vertical form-fill-seal Machine

 

 

Features:

one. Low cost high gain, high speed and efficiency.

two. Famous brand PLC control system, large touch screen, convenient to operate 

3. Servo film pulling system, Pneumatic horizontal sealing 

four. minimize the loss with complete automatic warn protection function 

five. It can complete feeding, measuring, filling, sealing, date printing, charging (exhausting), counting,

six. finished product delivery when it equips with feeding and measuring equipment.

7. the way of bag making:  automatic packing machine can make pillow-type bag and standing bag according to customers’ requirements. 

 

5. Finished product conveyor (optional)

 

It is used to convey finished product, and it is optional according to your requirement.

 

Application

 

 

 

Company Details

 

    ZheJiang Shouda Packaging Equipment & Substance Co.,Ltd.is a expert company of computerized packaging machineries & computerized filling and packing creation line for liquid,gel,aerosol item.

    ShouDa has handed CE certificate Standard of Eu and meet up with the requirement of GMP. It is also selected by “China High quality Industry Survey Centre” as a secure and certified enterprise who shell out focus to high quality,faith and popularity & brand-establishment All of our items are salable in a lot of countries and locations this kind of as Asia,Europe,America and Africa and many others.The organization has obtained wide reputation with the immediate and best round-the-clock services provided by senior engineers bear in head that Shouda will make you moved at the very same time.    

    Shouda insist”beneficial to you,it is also beneficial to us”.Get-acquire to shift buyer.The company strictly execute”24 hrs,”replies the guest’s suggestions as the first operate to employ.The organization has acquired wide popularity with the instant and perfect round-the-clock provider offered by senior engineers.Please bear in brain that Shouda will make you moved at the very same time.        

     We also focus on steady innovation of packaging to promote the packaging high quality and automatic degree for all sorts of merchandise,and hope to make eye-catching contribution to the promotion of items packaging top quality and packaging in the globally industry.

FAQ

Our company requires different marketplaces all more than the entire world, in a lot of fields with our outstanding item functionality.

 1.Q:Are you a producer or a investing firm?

 A:We are the maker with in excess of 17 years experience.

 2.Q:What is actually the payment conditions?

 A:T/T,thirty% deposit and 70% harmony ahead of shipping.

 3.Q:How to order?

 A:You can ship me an inquiry,then we could confirm the particulars through email messages or telephone.

 4.Q:How considerably is the transportation freight?

 A:The freight depends on the excess weight and dimensions,also the location port

5.Q:Why we must decide on your firm?

 A:We are expert in packing equipment over 17 many years, and we give much better right after-sale services. You assure no danger for our offer.

 

Be aware: When you send inquiry,please also included the capacity and bottles shape you need to work on the machine, it is easy and accurately for us to recommend a right machine! If any special,our manufacture also can design the machines according your requirement, many thanks for your cooperation!

Drum sprockets: These sprockets are usually broader to enhance the all round surface area make contact with amongst the sprocket and chain. This lowers stress on equally sections, creating a a lot more resilient program for weighty haul conveyors.
Sprockets are toothed, profiled wheels that mesh with the chain to transmit movement. Our sprockets are custom made fabricated higher-strength aluminum, black anodized for excellent functionality. Flat sprockets contain ep styles and are appropriate with all other components. Blade Sprockets are 6061-T6 Aluminum Hub Sprockets are 7075-T6 Aluminum Tooth Laser Suitable #twenty five or #25H Roller Chains Engraved On Every single Sprocket Now Straightforward To Use With Our Chain Tube Via Pipe

China Hot selling 1kg - 5kg Plastic Bag Fully Automatic Granule Particle Food Rice Packing Machine Price     near me shop

China high quality WJ4130 Widely used automatic wire coil tension pay off machine cable prefeeder spool wire pay-off machine with Best Sales

Product Description

 

Item Description

CP-1035 Cable Prefeeder

Product Parameters

Design

CP-1035

CP-1040

CP-1045

Wire diameter

three-20mm

3-20mm

3-20mm

Wire tray size

OD four hundred-630, width 250-five hundred

OD 500-800, width 300-600

OD 600-1000, width 450-750

Max load fat

1000kgs

1000kgs

1000kgs

Max. feeding speed

250m/min

250m/min

250m/min

Feeding motor energy

2.2KW

4KW

4KW

N.W.

550kgs

550kgs

600kgs

Electricity provide

220V/110V/50HZ/60HZ

Application

Mostly suited for the large square cables this sort of as new energy wire , charging pile cables, electricity cables, photovoltaic wire, BV cable, etc.

Feeding mode

Shaftless electricity pay out-off, frequency converter instantly controls pay-off speed, automated wire feed, automatic shutdown

This sequence of pay-off racks are suitable for computerized shell out-off of the stop processing of new energy auto wires, large square sheathed cables, etc.

 

one. Rigidity wheel: The tension wheel is divided into an upper fixed wheel group (3 parts) and a lower moving wheel group (2 pieces). The diameter of the stress wheel is 250~500mm.
two. Pace opinions: When the personal computer wire stripping device is doing work, the stress wheel moves with it, and the potentiometer is driven by the sprocket to rotate, and the potentiometer will suggestions a sign to the CZPT to manage the pace of the wire-off motor, thus managing the wire-off velocity and The computer wire stripping machine is synchronized.
3. Rigidity adjustment: According to the wire technical specs, improve or reduce the weight on the chain to change the tension of the cable.
4. The overall height of the pressure frame is 2 meters, which is convenient for guide winding.

Certifications

 

Packaging & Shipping and delivery

Packaging:
 Samll measurement machines:  Standard carton
 Medium size equipment: Thickened cartons and wood pallets
 Big size equipment: Plywood wooden circumstances

Delivery:
A. 3-5 workdays shipping and delivery from China by Air/Categorical(DHL,FedEx,UPS,EMS and many others.)
B. 25-30 workdays transport from China to Europe by teach. 
C. We can organize shipment by sea. Minium CBM prerequisite : 1 CBM 

Organization Profile

HangZhou Weijiang Automation Equipment Co., Ltd  is a CZPT technological innovation company specializing in processing and slicing, R&D of harness equipments.Our equipment are exported to over 20 nations and Our equipments are broadly used in a variety of industries at house and overseas, this sort of as photovoltaic, new energy vehicles, house appliances,industrial products, rail transit, communications and other industries.

Our major merchandise are :Wire tape winding machine weries,Wire cutting stripping machine series,Wire terminal lug crimping machine series,Pipe reducing machine collection.In addition,our factory acknowledge the R&D and creation of non-common automation equipments.Pick Weijiang,get the foreseeable future,welcome to check with us!

Our Positive aspects

We are 1 of the most professional Chinese wire cable procedure equipment producers and leaders.

* Best products and manufacturing unit price.
* On-time delivery and the shortest supply time.
* 1year warranty. If our items can not purpose appropriately within twelve months, we are going to supply spare elements for totally free and you need to pay for the shipping.
OEM and personalized service.
* User manuals will go with relative equipment.

QC: All items will be checked just before delivery.
Payment: If any unqualified solution is found, we will pay out the payment or send out new experienced merchandise to customers.
Routine maintenance & Mend: In circumstance of any upkeep or restore require, we are going to assist to find out the difficulty and supply relative direction.
Procedure Guidance: If you have any issue with operation, please really feel cost-free to get in touch with us.

FAQ

1. Why choose us?
We supply overall options for processing gear. Our regular tools is quite total, all are in inventory and can be transported speedily. We have our personal equipment manufacturing unit, which can flippantly personalize equipment according to customer needs, this sort of as buying distinct appearances and brands for brokers, and non-standard gear in accordance to buyer specifications.

2. Must I fear about the high quality?
Ahead of delivery, we do examination the machine functioning situation for you.
Take a movie of the standard procedure of the machine to you, and then affirm the supply

3.How can I know your machine is developed for my product?
You explain to us the specific parameters of your item, or you can send out us samples of your product and we examination it on device.
Video for you to make samples

four. How to operate the products?
My buddy, will not worry about it, we have created vedio for you, it will present you how to do it action by step. Contact our engineers at any time when you never comprehend, support video clip and phone communication

5.When the equipment cannot perform nicely,What need to I do?
The Engineer is on-line for 24-hours, they can check out the troubles and then give you remedy way really before long. You should rest confident that manual will be offered along with equipment,making sure you can function the device simply.

Metal Break up Sprockets: These sprockets are break up in half for less difficult installation into the chain system without having getting rid of the axle. The operator can place every single 50 % into the chain before bolting the halves collectively. This only permits the sprocket to be replaced with no dismantling the entire assembly and retains the operator from possessing to loosen or reposition the chain.
Drum sprockets: These sprockets are typically broader to enhance the overall area get in touch with among the sprocket and chain. This reduces pressure on both sections, making a a lot more durable method for hefty haul conveyors.

China high quality WJ4130 Widely used automatic wire coil tension pay off machine cable prefeeder spool wire pay-off machine     with Best Sales

China OEM Automatic High Power Diesel Type Grainbinder Harvester Machine for Lavender near me manufacturer

Solution Description

Automated large electrical power diesel type grainbinder harvester equipment for lavender
Description:
The wind rower consists of 2 principal parts: the supporting primary machine and the windrower. The supporting primary engine is composed of motor, transmission gearbox, frame, multi-practical handrail for managing movement and widened tire. It is primarily utilized for harvesting wheat, rice and other platycodon crops. It is ideal for platform topography and plant height of .5~1.5 meters. The diameter (downs of less than 45°) is considerably less than 4 winds and is not wet. The power output shaft of the wind rower is transmitted to the header transmission by means of the transmission shaft, and is transmitted to the eccentric crank slide system by way of the transmission claw clutch and a pair of CZPT to travel the cutter, and is transmitted to the conveyor chain by way of the sprocket chain. The generate shaft drives the upper and reduce conveyor chains. The Fuhe belt is pushed by the Fuhexing star wheel. The motion of the HangZhou star wheel is driven by the tooth extraction of the conveyor chain.Modest measurement, gentle fat, reduced fuel use, adaptable maneuverability, easy and hassle-free procedure, low labor, reduced reducing, and so forth. Computerized windrower, automatically turned to 1 aspect.
Parameter:

Reducing width 1000mm
Stay peak ≥50mm
Placement angle 90±20
Placement way Aspect route
Production potential two-3.5mu/h
Electrical power Diesel engine 8Hp
Excess weight 310kg
Dimension one.4*1.4*.eighty five

 

The teeth of a solitary pitch sprocket mesh with a single tooth for every sprocket. Double pitch sprockets search like single pitch sprockets, but the chain only meshes with the other enamel. This means that a double-pitch sprocket has the identical number of enamel as a one-pitch sprocket, but only 50 percent of the tooth are engaged with the chain. The major distinction is that the double pitch sprockets are cut with a special pitch circle diameter for optimal engagement. For ep roller chains, the sprockets are the very same if the quantity of tooth is 32 or more for one and double chains.
Drum sprockets: These sprockets are generally wider to improve the overall surface speak to among the sprocket and chain. This minimizes stress on both sections, generating a more sturdy method for large haul conveyors.

China OEM Automatic High Power Diesel Type Grainbinder Harvester Machine for Lavender     near me manufacturer