Tag Archives: bar machine

China supplier Round Steel Bar Cutter Cutting Machine to Cut Stainless Steel with Hot selling

Solution Description

Product Description

The metal bar slicing equipment is a unique equipment for chopping steel bar blanking pup joints, which is largely
employed for processing steel bar waste before returning to the furnace. Mainly employed in squander steel recycling plants.
Rebar cutter amchine is started by the motor and driven by the triangle belt to rotate the reducer, and then the
reducer is driven by the sprocket to drive the gearbox to make the cutter carry on to function to attain the influence
of slicing the metal.

Our Benefits

     1. This model is computerized unloading, that is, the material falls instantly, with higher efficiency.
     2. It adopts double heads, which can discharge supplies at the exact same time, and the effectiveness of 1 equipment
is doubled.
     3. The feeding method has a high fault tolerance rate, and can also handle a bit bent steel bars (as prolonged as
it does not CZPT ninety degrees).
     4. The cutter is simple to disassemble and substitute.
     5. Special cutter physique substance and processing technologies, 4-side cutter head (1 end can be worn and the
other conclude can be utilised) can be replaced, 1 cutter tops 4 knives, tremendously extending the cutting
The provider life of the knife.
     6. The equipment has low sound, and the motor load is reasonably sleek, which impacts the electricity grid.
     7. The tools principle is simple, and the upkeep and fix are really convenient.
     8. Bolstered human body, modest size, compact framework, reliable and reputable.
 

Thorough Pictures

       
           For much more specifics, remember to send out easy inquiry concept to get quotation!!!

Ep prefabricated steel sprockets are manufactured of C1045 metal, induction hardened or heat-dealt with steel, 400 – five hundred BHN hardness. Remember to specify the resources you require. Except if otherwise requested, the outdoors diameter of the hub must be sufficient to accommodate the needed holes and keyways. Keys to these things are not supplied except if asked for or put in on the shaft. Split sprockets for welding or break up sprockets for bolts provide an inexpensive way to install sprockets on shafts where removing of the shaft assembly is prohibited. Several dimensions of sprockets are geared up with holes, keyways, and set screws. Discs or partly completed sprockets are also stocked. For prolonged sprockets and idlers, specify the chain measurement employed.
Roller sprockets are typically utilized in industrial and industrial applications to transmit pressure to the chain by meshing with rollers on the chain, the enamel of which mate with the internal plates of the chain. A broad selection of applications advantage from these, like conveyor belts, massive industrial drives, robotics, electrical assembly, and far more.

China supplier Round Steel Bar Cutter Cutting Machine to Cut Stainless Steel     with Hot selling

China Best Sales Mobile Small Steel Bar Rebar Cutting Machine with Clutch 32 Diameter near me factory

Item Description

Cellular modest metal bar rebar slicing device with clutch 32 diameter

Item Description                                                                                                                                    

The scrap metal reducing equipment is a unique equipment for cutting short metal bars and reducing the joints. It is primarily utilised for the processing of metal scraps prior to they are returned to the furnace. Used in squander steel recycling vegetation.

Functioning Principle                                                                                                                                       
The scrap steel slicing machine is driven by the motor to drive the velocity reducer to rotate, and then the speed reducer operates by way of the sprocket transmission gearbox to keep the cutter functioning repeatedly, so as to lower the metal bar.

Product Feature                                                                                                                                          

one. Automatical reducing
The substance is immediately dropped, and the effectiveness is really substantial.

two. Double feeding,double performance
Two feeding lower at the same time,

3. The feed method has a substantial fault tolerance price
Slightly curved metal bars can be processed(as extended as they do not CZPT ninety levels).

four. The cutter is effortless to disassemble and replace

five. Specific knife body material and processing technology
four face cutter head (one use can be utilised for an additional head) can be changed, a knife leading 4 knife, tremendously extended the reduce
The provider life of the knife.

six. Minimal sounds
The motor load is fairly sleek, affect on the electrical power grid.

seven. Easy basic principle 
Hassle-free to upkeep and restore

8. Compact structure, sound and dependable.
bolstered human body, modest dimension

Merchandise Parameters                                                                                                                                   

 

Metal Bar Cutting Machine
Product YG-25 YG-32 YG-32
Application Content Φ6mm-25mm Φ6mm-32mm
Engine Electric ,380V,50HZ,3phase
Energy seven.5kw 11kw 15kw
Chopping Speed 35times/min 100times/min 150times/min
Operating Effectivity 700kg/h one.5ton/h 2ton/h
Feeding Duration 75mm 95mm 95mm
Equipment Measurement a thousand*one thousand*800mm 1200*1200*1000mm 1200*1700*1000mm
Bodyweight 400kg 1100kg 1400kg

Solution Details                                                                                                                                           

Company Information                                                                                                                               

ZheJiang CZPT Equipment Co., Ltd. is a huge machinery producing business which focuses on research and improvement, creation(42 enginers) and revenue (120 income folks) of steel bar and pipe device,developing design machinery, bridge development equipments and so on.

We believes that very good quality can give us survival, therefore we only offer you leading merchandise. All the items with high high quality satisfy worldwide specifications and are highly approximated by all clientele at residence and abroad.

All the staff in our company are professionally trained, so we can suggest you the most appropriate equipment. Every equipment will be strictly examined ahead of shipping. Any issue about the device will be replied inside 24 several hours. Welcome you 

Get in touch with Us for more details                                                                                                                  

 

More than time, the sprocket teeth put on out because of to friction brought on by the continual bodily get in touch with amongst the sprocket tooth and the sprocket. ep manufactures wise tooth sprockets with use indicator pins. These visual wear indicators notify operators and inspectors when sprockets are nevertheless functioning safely and securely and when they want to be replaced.
Roller sprockets are frequently utilised in industrial and professional purposes to transmit pressure to the chain by meshing with rollers on the chain, the teeth of which mate with the inner plates of the chain. A broad assortment of applications reward from these, like conveyor belts, big industrial drives, robotics, electrical assembly, and far more.

China Best Sales Mobile Small Steel Bar Rebar Cutting Machine with Clutch 32 Diameter     near me factory

China Custom Hydraulic Portable Cutting Reinforced Steel Bar Cutter Machine near me factory

Merchandise Description

Hydraulic transportable chopping bolstered metal bar cutter equipment

Solution Description                                                                                                                                    

The scrap steel cutting equipment is a special equipment for cutting quick steel bars and cutting the joints. It is primarily used for the processing of steel scraps before they are returned to the furnace. Utilized in squander steel recycling crops.

Working Principle                                                                                                                                       
The scrap metal slicing device is driven by the motor to generate the velocity reducer to rotate, and then the speed reducer runs by way of the sprocket transmission gearbox to preserve the cutter doing work continuously, so as to lower the metal bar.

Solution Feature                                                                                                                                          

one. Automatical cutting
The materials is automatically dropped, and the performance is incredibly higher.

two. Double feeding,double effectiveness
Two feeding reduce at the exact same time,

three. The feed technique has a higher fault tolerance rate
Somewhat curved metal bars can be processed(as long as they do not CZPT 90 degrees).

four. The cutter is effortless to disassemble and substitute

five. Special knife human body substance and processing technological innovation
4 confront cutter head (1 put on can be utilised for one more head) can be changed, a knife prime 4 knife, greatly extended the reduce
The provider existence of the knife.

six. Lower sounds
The motor load is comparatively clean, affect on the energy grid.

7. Straightforward basic principle 
Practical to routine maintenance and fix

eight. Compact structure, solid and reputable.
reinforced entire body, small size

Product Parameters                                                                                                                                   

 

Metal Bar Reducing Machine
Product YG-25 YG-32 YG-32
Software Material Φ6mm-25mm Φ6mm-32mm
Motor Electric ,380V,50HZ,3phase
Power seven.5kw 11kw 15kw
Reducing Pace 35times/min 100times/min 150times/min
Working Effectivity 700kg/h 1.5ton/h 2ton/h
Feeding Duration 75mm 95mm 95mm
Equipment Dimension one thousand*1000*800mm 1200*1200*1000mm 1200*1700*1000mm
Weight 400kg 1100kg 1400kg

Product Details                                                                                                                                           

Firm Information                                                                                                                               

ZheJiang CZPT Machinery Co., Ltd. is a huge machinery manufacturing enterprise which focuses on analysis and development, manufacturing(42 enginers) and product sales (120 income folks) of steel bar and pipe device,creating development equipment, bridge building equipments and so on.

We believes that very good good quality can give us survival, as a result we only give you leading products. All the products with large good quality fulfill global requirements and are hugely believed by all consumers at house and overseas.

All the employees in our company are skillfully educated, so we can advise you the most acceptable gear. Each device will be strictly examined prior to shipping and delivery. Any concern about the equipment will be replied inside 24 several hours. Welcome you 

Speak to Us for more details                                                                                                                  

 

Roller sprockets are generally employed in industrial and professional programs to transmit force to the chain by meshing with rollers on the chain, the tooth of which mate with the interior plates of the chain. A wide range of purposes advantage from these, which includes conveyor belts, big industrial drives, robotics, electrical assembly, and more.
Sprockets are manufactured to ISO606 and ASME B29.100 expectations, accessible in plate, single and double hub configurations, constructed from large good quality carbon steel, optional tapered bushings simplify set up and removal, treatment options offered upon request, like black oxide

China Custom Hydraulic Portable Cutting Reinforced Steel Bar Cutter Machine     near me factory

China high quality Metal Production Cutting Tool Steel Bar Cutting Machine Rebar Cutter wholesaler

Solution Description

Metal Production Slicing resource Metal Bar Chopping equipment rebar cutter

Item Description                                                                                                                                    

The scrap metal chopping device is a particular products for cutting limited metal bars and chopping the joints. It is primarily employed for the processing of metal scraps prior to they are returned to the furnace. Used in waste metal recycling plants.

Working Principle                                                                                                                                       
The scrap steel reducing device is pushed by the motor to drive the speed reducer to rotate, and then the velocity reducer operates via the sprocket transmission gearbox to preserve the cutter doing work continuously, so as to lower the steel bar.

Item Feature                                                                                                                                          

one. Automatical chopping
The content is automatically dropped, and the efficiency is really substantial.

two. Double feeding,double efficiency
Two feeding cut at the very same time,

three. The feed technique has a large fault tolerance rate
Marginally curved metal bars can be processed(as extended as they do not CZPT 90 levels).

4. The cutter is straightforward to disassemble and replace

five. Specific knife body content and processing technology
4 face cutter head (1 use can be utilized for yet another head) can be changed, a knife top 4 knife, greatly prolonged the minimize
The provider daily life of the knife.

6. Minimal sounds
The motor load is reasonably easy, impact on the power grid.

seven. Straightforward principle 
Hassle-free to upkeep and restore

8. Compact framework, reliable and reputable.
bolstered body, tiny measurement

Merchandise Parameters                                                                                                                                   

 

Metal Bar Reducing Device
Model YG-twenty five YG-32 YG-32
Software Substance Φ6mm-25mm Φ6mm-32mm
Motor Electric ,380V,50HZ,3phase
Power seven.5kw 11kw 15kw
Reducing Velocity 35times/min 100times/min 150times/min
Functioning Effectivity 700kg/h one.5ton/h 2ton/h
Feeding Duration 75mm 95mm 95mm
Device Size one thousand*one thousand*800mm 1200*1200*1000mm 1200*1700*1000mm
Bodyweight 400kg 1100kg 1400kg

Solution Details                                                                                                                                           

Company Information                                                                                                                               

ZheJiang CZPT Machinery Co., Ltd. is a large equipment producing company which focuses on study and growth, manufacturing(42 enginers) and revenue (one hundred twenty product sales individuals) of metal bar and pipe device,constructing construction machinery, bridge building equipments and so on.

We thinks that good good quality can give us survival, hence we only provide you best merchandise. All the items with large quality meet worldwide requirements and are very approximated by all clientele at property and abroad.

All the employees in our business are professionally qualified, so we can advocate you the most acceptable equipment. Each device will be strictly examined before shipping and delivery. Any query about the equipment will be replied inside of 24 several hours. Welcome you 

Make contact with Us for further details                                                                                                                  

 

Ep prefabricated metal sprockets are made of C1045 steel, induction hardened or warmth-dealt with metal, four hundred – 500 BHN hardness. You should specify the supplies you require. Except if or else requested, the outside the house diameter of the hub need to be ample to accommodate the needed holes and keyways. Keys to these products are not supplied until asked for or mounted on the shaft. Break up sprockets for welding or break up sprockets for bolts offer an cost-effective way to put in sprockets on shafts the place elimination of the shaft assembly is prohibited. A lot of dimensions of sprockets are geared up with holes, keyways, and established screws. Discs or partly concluded sprockets are also stocked. For extended sprockets and idlers, specify the chain dimension utilized.
The teeth of a one pitch sprocket mesh with 1 tooth for each sprocket. Double pitch sprockets look like solitary pitch sprockets, but the chain only meshes with the other teeth. This means that a double-pitch sprocket has the very same number of enamel as a single-pitch sprocket, but only fifty percent of the tooth are engaged with the chain. The main difference is that the double pitch sprockets are reduce with a specific pitch circle diameter for best engagement. For ep roller chains, the sprockets are the identical if the amount of teeth is 32 or much more for solitary and double chains.

China high quality Metal Production Cutting Tool Steel Bar Cutting Machine Rebar Cutter     wholesaler