Tag Archives: Chain Conveyor Parts

China Best Sales Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive CZPT Roller Chain Sprockets

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

drive sprocket

How do I properly clean and lubricate drive sprockets to prolong their lifespan?

To prolong the lifespan and ensure optimal performance of your drive sprockets, regular cleaning and lubrication are essential. Here’s a step-by-step guide on how to clean and lubricate drive sprockets:

  1. 1. Cleaning:

Before lubricating the sprockets, it’s crucial to clean them thoroughly to remove dirt, debris, and old lubricants. Follow these steps:

  • Use a stiff brush or compressed air to remove loose dirt and debris from the sprocket teeth and chain.
  • Prepare a cleaning solution by mixing mild detergent or degreaser with water. Avoid using harsh chemicals that could damage the sprockets or the surrounding components.
  • Using a clean cloth or brush, apply the cleaning solution to the sprockets and scrub away any stubborn grime.
  • Rinse the sprockets with clean water to remove the cleaning solution and remaining debris.
  • Dry the sprockets thoroughly using a clean cloth or allow them to air dry.
  1. 2. Lubrication:

Once the sprockets are clean and dry, it’s time to apply lubrication. Lubrication helps reduce friction, prevent wear, and protect the sprockets from corrosion. Here’s how to properly lubricate the drive sprockets:

  • Choose a suitable lubricant specifically designed for sprockets and chains. It’s essential to use a lubricant that is appropriate for the application and environmental conditions.
  • Apply a small amount of lubricant to each sprocket tooth while rotating the chain to ensure even coverage.
  • Allow the lubricant to penetrate the sprocket teeth and chain links. This may take a few minutes.
  • Wipe off any excess lubricant with a clean cloth to prevent accumulation of dirt and debris.
  • Check the manufacturer’s recommendations for lubrication intervals and reapply the lubricant as needed based on the operating conditions.

Regularly cleaning and lubricating your drive sprockets will help extend their lifespan, reduce maintenance issues, and optimize the performance of your power transmission system. Remember to follow the manufacturer’s guidelines and best practices for cleaning and lubricating to achieve the best results.

drive sprocket

Can I convert my machinery’s drive sprocket setup to achieve higher or lower gear ratios?

Yes, in many cases, you can convert your machinery’s drive sprocket setup to achieve higher or lower gear ratios. The gear ratio determines the relationship between the number of teeth on the driving sprocket (input) and the driven sprocket (output). By changing the size of the sprockets, you can alter the gear ratio, which, in turn, affects the speed and torque output of the machinery.

To achieve a higher gear ratio (increased output speed with reduced torque), you can use a smaller driven sprocket or a larger driving sprocket. This setup will cause the output shaft to rotate faster than the input shaft, making it suitable for applications where higher speeds are required but with lower torque output.

Conversely, to achieve a lower gear ratio (reduced output speed with increased torque), you can use a larger driven sprocket or a smaller driving sprocket. This configuration will cause the output shaft to rotate slower than the input shaft, making it suitable for applications where higher torque is needed but with lower rotational speed.

However, when modifying the gear ratio by changing the sprocket sizes, it’s essential to consider the limitations of the machinery. Increasing the gear ratio may lead to increased wear on the components and may exceed the system’s design limits. Similarly, decreasing the gear ratio excessively may result in decreased efficiency and compromised performance.

Before making any changes to the drive sprocket setup, it is advisable to consult the machinery’s manufacturer or a qualified engineer. They can help you determine the suitable gear ratio for your specific application and ensure that the modifications align with the machinery’s capabilities and intended usage.

drive sprocket

Can I replace a worn-out drive sprocket, or should I replace the entire power transmission system?

Whether you can replace just the worn-out drive sprocket or need to replace the entire power transmission system depends on several factors, including the overall condition of the system and the extent of wear on the sprocket and other components.

In many cases, it is possible to replace a worn-out drive sprocket without replacing the entire system. Sprockets are individual components, and if the rest of the power transmission system, including the chain and other sprockets, is in good condition, replacing only the worn sprocket can be a cost-effective solution.

However, there are some important considerations:

  • Compatibility: When replacing a drive sprocket, ensure that the new sprocket is compatible with the existing chain and other sprockets. The pitch, tooth profile, and number of teeth must match the original specifications.
  • Condition of Other Components: If the chain and other sprockets are also significantly worn, replacing only one sprocket may not provide a lasting solution. In such cases, it is advisable to replace the entire power transmission system to ensure optimal performance and prevent premature wear.
  • Cost and Labor: Replacing a single sprocket is generally less expensive and less labor-intensive than replacing the entire system. However, if the system is showing signs of wear in multiple components, a complete replacement might be a more cost-effective long-term solution.
  • System Age: If the power transmission system is old and has been in use for an extended period, it might be more practical to replace the entire system. Newer components will likely offer improved performance and durability.

Before deciding to replace only the worn-out drive sprocket or the entire power transmission system, it is essential to assess the overall condition of the system and consult with a qualified technician or engineer. They can provide valuable insights and recommendations based on the specific application and the extent of wear on the components.

China Best Sales Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive CZPT Roller Chain Sprockets  China Best Sales Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive CZPT Roller Chain Sprockets
editor by CX 2023-10-04

China Good quality Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive CZPT Roller Chain Sprockets

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|

Order Sample

Customization:
Available

|

Customized Request

drive sprocket

Can drive sprockets be used in precision motion control and automation systems?

Yes, drive sprockets can be used in precision motion control and automation systems. In such systems, precise and accurate motion control is essential for various applications, such as robotics, CNC machines, automated manufacturing processes, and conveyor systems.

Drive sprockets, in combination with the appropriate chain and other power transmission components, offer an efficient and reliable way to transfer motion and power in these precision systems. They provide positive engagement between the sprocket teeth and the chain, ensuring a consistent and repeatable movement.

Some key advantages of using drive sprockets in precision motion control and automation systems include:

  • 1. High Accuracy: Drive sprockets provide precise motion control with minimal backlash, ensuring accurate positioning and repeatability in critical tasks.
  • 2. Low Maintenance: When properly installed and maintained, drive sprockets exhibit low wear and require minimal maintenance, reducing downtime in automated processes.
  • 3. High Efficiency: The engagement between the sprocket teeth and the chain minimizes energy losses, resulting in high overall system efficiency.
  • 4. Compact Design: Drive sprockets have a compact design, allowing for the creation of space-efficient motion control systems.
  • 5. Versatility: Sprockets are available in various sizes, pitches, and materials, making them adaptable to different motion control applications and loads.

It’s important to choose the right type and size of drive sprockets for precision motion control systems. Factors such as the required gear ratio, speed, torque, and environmental conditions must be considered during the selection process.

Additionally, in precision motion control systems, attention to detail in installation and alignment is critical. Proper tensioning of the chain and accurate alignment of the sprockets will contribute to smoother operation and increased system longevity.

In conclusion, drive sprockets are well-suited for use in precision motion control and automation systems, providing the necessary accuracy, reliability, and efficiency required for these demanding applications.

drive sprocket

Can drive sprockets be used in agricultural machinery and equipment?

Yes, drive sprockets are commonly used in various agricultural machinery and equipment. They play a critical role in power transmission systems that are utilized in agricultural applications. Here are some of the agricultural machinery and equipment where drive sprockets are commonly employed:

  • Tractors: Tractors are a fundamental part of modern agriculture, and drive sprockets are used in the transmission system to transfer power from the engine to the wheels or tracks. Sprockets are crucial components in both wheeled and tracked tractors, ensuring efficient power delivery for various agricultural tasks.
  • Combine Harvesters: Drive sprockets are used in combine harvesters to transfer power from the engine to the wheels or tracks, allowing for precise control and smooth movement during harvesting operations.
  • Balers: Agricultural balers use drive sprockets in their power transmission systems to drive the mechanisms responsible for compacting and baling crops such as hay, straw, or silage.
  • Planters and Seeders: Drive sprockets are utilized in planting and seeding equipment to ensure precise and consistent seed placement and spacing in the field.
  • Sprayers: Agricultural sprayers use drive sprockets in their transmission systems to power the spraying mechanisms, ensuring even and efficient distribution of fertilizers, herbicides, and pesticides.
  • Harvesting Machines: Various harvesting machines, such as grain harvesters and fruit harvesters, rely on drive sprockets to power the harvesting mechanisms and conveyors.
  • Tillage Equipment: Drive sprockets are used in tillage equipment to transfer power to the cutting and tilling components, preparing the soil for planting.
  • Irrigation Systems: Drive sprockets are employed in agricultural irrigation systems, such as center pivot systems, to control the movement of the irrigation equipment across the field.

Drive sprockets in agricultural machinery are often subjected to challenging conditions, including dust, dirt, and varying terrains. Therefore, it is essential to use high-quality sprockets made from durable materials, such as steel or hardened alloys, to withstand the demanding agricultural environment.

Regular maintenance, including proper lubrication and inspection for wear and damage, is crucial to ensure the reliable operation and longevity of drive sprockets in agricultural machinery. By adhering to recommended maintenance schedules and replacing worn components promptly, farmers and agricultural operators can optimize the performance and productivity of their equipment.

drive sprocket

Can I upgrade my drive sprockets to improve the efficiency and performance of my machinery?

Yes, upgrading your drive sprockets can significantly improve the efficiency and performance of your machinery. Drive sprockets play a crucial role in power transmission systems, and using advanced or specialized sprockets can lead to several benefits:

  • Enhanced Durability: Upgraded sprockets are often made from high-quality materials and advanced manufacturing processes, providing greater resistance to wear, fatigue, and corrosion. This increased durability can extend the sprockets’ lifespan and reduce the frequency of replacements, resulting in cost savings.
  • Improved Efficiency: Modern sprockets are designed with precision and often feature optimized tooth profiles. Upgrading to sprockets with improved tooth profiles can reduce friction, noise, and power losses during power transmission, leading to enhanced overall system efficiency.
  • Higher Load-Carrying Capacity: Some upgraded sprockets are engineered to handle higher loads and stresses, making them suitable for heavy-duty applications and improving the machinery’s capacity to handle more significant loads.
  • Customized Solutions: Manufacturers may offer customizable sprockets tailored to specific applications. Customization options can include different tooth counts, pitches, or even specialized coatings or surface treatments to meet the unique requirements of your machinery.
  • Compatibility with Advanced Chains: Upgraded sprockets are often designed to work seamlessly with modern, high-performance chains. Pairing these sprockets with advanced chains can further optimize the power transmission system’s performance and reliability.

When considering sprocket upgrades, it is essential to consult with knowledgeable suppliers or engineers familiar with power transmission systems. They can provide valuable insights into the best sprocket options for your specific machinery and operating conditions.

Remember that upgrading the drive sprockets alone might not yield the desired improvements if other components in the power transmission system, such as chains and bearings, are worn or outdated. Therefore, a comprehensive evaluation of the entire system is recommended to achieve the best results.

China Good quality Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive CZPT Roller Chain Sprockets  China Good quality Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive CZPT Roller Chain Sprockets
editor by CX 2023-09-04

China Standard Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive Gear Wheel Roller Chain Sprockets manufacturer

Product Description

SPROCKET  5/8” X 3/8”  10B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 16.0mm
Radius Width C 1.6mm
Tooth Width b1 9.0mm
Tooth Width B1 9.1mm
Tooth Width B2 25.5mm
Tooth Width B3 42.1mm
10B SERIES ROLLER CHAINS  
Pitch 15.875 mm
Internal Width 9.65 mm
Roller Diameter 10.16 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
dm D1 A dm D2 A dm D3 A
8 47.0 41.48 25 10 25 25 12 40 25 12 55
9 52.6 46.42 30 10 25 30 12 40 30 12 55
10 57.5 51.37 35 10 25 35 12 40 35 12 55
11 63.0 56.34 37 12 30 39 14 40 39 16 55
12 68.0 61.34 42 12 30 44 14 40 44 16 55
13 73.0 66.32 47 12 30 49 14 40 49 16 55
14 78.0 71.34 52 12 30 54 14 40 54 16 55
15 83.0 76.36 57 12 30 59 14 40 59 16 55
16 88.0 81.37 60 12 30 64 16 45 64 16 60
17 93.0 86.39 60 12 30 69 16 45 69 16 60
18 98.3 91.42 70 14 30 74 16 45 74 16 60
19 103.3 96.45 70 14 30 79 16 45 79 16 60
20 108.4 101.49 75 14 30 84 16 45 84 16 60
21 113.4 106.52 75 16 30 85 16 45 85 20 60
22 118.0 111.55 80 16 30 90 16 45 90 20 60
23 123.5 116.58 80 16 30 95 16 45 95 20 60
24 128.3 121.62 80 16 30 100 16 45 100 20 60
25 134.0 126.66 80 16 30 105 16 45 105 20 60
26 139.0 131.70 85 20 35 110 20 45 110 20 60
27 144.0 136.75 85 20 35 110 20 45 110 20 60
28 148.7 141.78 90 20 35 115 20 45 115 20 60
29 153.8 146.83 90 20 35 115 20 45 115 20 60
30 158.8 151.87 90 20 35 120 20 45 120 20 60
31 163.9 156.92 95 20 35 120 20 45 120 20 60
32 168.9 161.95 95 20 35 120 20 45 120 20 60
33 174.5 167.00 95 20 35 120 20 45 120 20 60
34 179.0 172.05 95 20 35 120 20 45 120 20 60
35 184.1 177.10 95 20 35 120 20 45 120 20 60
36 189.1 182.15 100 20 35 120 20 45 120 25 60
37 194.2 187.20 100 20 35 120 20 45 120 25 60
38 199.2 192.24 100 20 35 120 20 45 120 25 60
39 204.2 197.29 100 20 35 120 20 45 120 25 60
40 209.3 202.34 100 20 35 120 20 45 120 25 60
41 214.8 207.38 *100 20 40 120 20 50 *130 25 60
42 2,199 212.43 *100 20 40 120 20 50 *130 25 60
43 224.9 217.48 *100 20 40 120 20 50 *130 25 60
44 230.0 222.53 *100 20 40 120 20 50 *130 25 60
45 235.0 227.58 *100 20 40 *120 20 50 *130 25 60
46 240.1 232.63 *100 20 40 *120 20 50 *130 25 60
47 245.1 237.68 *100 20 40 *120 20 50 *130 25 60
48 250.2 242.73 *100 20 40 *120 20 50 *130 25 60
49 255.2 247.78 *100 20 40 *120 20 50 *130 25 60
50 260.3 252.82 *100 20 40 *120 20 50 *130 25 60
51 265.3 257.87 *100 20 40 *120 20 50 *130 25 60
52 270.4 262.92 *100 20 40 *120 20 50 *130 25 60
53 275.4 267.97 *100 20 40 *120 20 50 *130 25 60
54 280.5 273.03 *100 20 40 *120 20 50 *130 25 60
55 285.5 278.08 *100 20 40 *120 20 50 *130 25 60
56 290.6 283.13 *100 20 40 *120 20 50 *130 25 60
57 296.0 288.18 *100 20 40 *120 20 50 *130 25 60
58 300.7 293.23 *100 20 43 *120 20 57 *130 25 64
59 305.7 298.28 *100 20 43 *120 20 57 *130 25 64
60 310.8 303.33 *100 20 43 *120 20 57 *130 25 64
62 321.4 313.43 *100 20 43 *120 20 57 *130 25 64
64 331.5 323.53 *100 20 43 *120 20 57 *130 25 67
65 336.5 328.58 *100 20 43 *120 20 57 *130 25 67
66 341.6 333.64 *100 20 43 *120 20 57 *130 25 67
68 351.7 343.74 *100 20 43 *120 20 57 *130 25 67
70 361.8 353.84 *100 20 43 *120 20 57 *130 25 67
72 371.9 363.94 *100 20 43 *120 20 57 *130 25 67
75 387.1 379.10 *100 20 43 *120 20 57 *130 25 67
76 392.1 384.15 *100 20 43 *120 20 57 *130 25 67
78 402.2 394.25 *100 20 43 *120 20 57 *130 25 67
80 412.3 404.36 *100 20 43 *130 20 57 *130 25 67
85 437.6 429.62 *100 20 50 *130 20 58 *130 25 67
90 462.8 454.88 *100 20 50 *130 20 58 *130 25 67
95 488.5 480.14 *100 20 50 *130 20 58 *130 25 67
100 513.4 505.40 *100 20 50 *130 20 58 *130 25 67
110 563.9 555.92 *100 20 50 *130 20 58 *130 25 67
114 584.1 576.13 *100 20 50 *130 20 58 *130 25 67
120 614.4 606.45 *100 20 50 *130 20 58 *130 25 67
125 639.7 631.51 *100 20 50 *130 20 58 *130 25 67

Notice: *welding hub

BASIC INFO.
 

Product name  DIN ISO Standard Sprocket for Roller Chain
Materials Available  1. Stainless Steel: SS304, SS316, etc
2. Alloy Steel: C45, 45Mn, 42CrMo, 20CrMo, etc
3. OEM according to your request
Surface Treatment Heat treatment, Quenching treatment, High frequency normalizing treatment, Polishing, Electrophoresis paint processing, Anodic oxidation treatment, etc
Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Size Customer Drawings & ISO standard 
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order
Certificate ISO9001: 2008 
Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 20 days for samples. 45 days for official order.

INSTALLATION AND USING

The chain  spoket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 

 

Standard Or Nonstandard: Nonstandard, Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car, Motor, Electric Cars, Motorcycle, Machinery,
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear, Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Alloy Steel, 1045, Stainless Steel, Q235, Brass,
Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

Sprocket Basics

When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.

size

There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.

Material

Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
sprocket

Function

A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
sprocket

maintain

Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.

China Standard Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive Gear Wheel Roller Chain Sprockets     manufacturer China Standard Chain Conveyor Transmission Parts Stainless Steel Idler Taper Transmission Drive Gear Wheel Roller Chain Sprockets     manufacturer
editor by CX 2023-06-07

China factory Har1775 Plastic Flexible Chain Conveyor Parts Injection Machined Sprocket supplier

Product Description

Har1775 material POM/PP Belt Conveyor Parts Plastic Chain Sprocket used for food & beverage

Brand Name Hairise
Product  name Har1775 sprocket
Material Plastic
Inspection Equipments 3D Measure Instrument, CMM,  Spectrum Analyzers,  Electronic balance,  Microscope, Altimeter ,  Calipers,  Micrometer,etc.
Application field Parts are used on vehicles, printing machines, textile machines, electronic machines, etc.
Manufacturing process CNC machining Broaching, Drilling, Milling, Other Machining Services, Rapid Prototyping,
Turning,
QC inspection Make sure 100% inspection before the delivery

Advantages of the CZPT products:
1. This products are convenient to assembly and maintain
2. All color could be available
3. This modular conveyor belt can bear High mechanical strength
4. This modular conveyor belt has Excellent product handling performance
5. These modular conveyor belts are wear resistance and Oil Resistant
6. We are a professional conveyor system manufacturer, our product line contains modular belt, slat top chain, conveyor spare parts, conveyor system.
7. We can provide good after-sale service.
8. Every product can be customized 

Application:
Bakery, Dairy, Fruit, and Vegetable
We have extensive experience in developing specialized solutions tailored to the needs of many different Bakery industry segments: bread and bun, fresh pastry (oven and fried pastry), pizza, pasta (fresh and dry), frozen bread, frozen pastry, cookies, and crackers, with our material handling equipment conveyor systems conveyor plastic modular belt conveyor you can get surprised!

Meat Poultry Seafood
With belts and accessories designed to meet the specific needs of fruit and vegetable processing and packaging applications, CZPT is committed to helping customers achieve their operational and business goals.
Hairise continues to develop new and better ways for customers to increase throughput efficiency, improve sanitation, and reduce the costs of belt ownership.
Material handling equipment conveyor systems conveyor plastic modular belt conveyor technology to meet the specific challenges of seafood processors. 

Ready Meals
Ready meal customers who equip their lines with CZPT Industrial plastic slat table top food grade conveyor chain realize many critical benefits, including:
·Reduced sanitation costs and improved food safety
·Improved line efficiency and maintain product alignment
·Reduced unscheduled downtime and reduced labor needs

Mu Jia Automation Technology(ZheJiang ) Co, Ltd.
MuJia is an integrated company engaged in the R&D, manufacture and sale of slat top chain,modular belt,conveyor system and other related components almost 20 years. Insisting on the operation principle of “Quality Based and Service First”, our company has won a high reputation through many years of development. We also cooperate with some CZPT domestic and overseas enterprises.

Our head office located in ZheJiang ,new factory located in ZheJiang province,covers an areas of 15,000 square meter,there are 3 main buildings:office building,conveyor assembly workshop and production workshop.More than 10 machines for producing,many hundreds of item models for meeting customer variety requirements.Our main products are modular belt,slat top chain,flexible chain,conveyor system,comb,rail,sprocket and other conveyor related components.They are widely used in food, soft drink, packaging & manufacturing, tobacco, medicine & chemical, electronics, automobiles and logistics industries.

Q1. Where is your factory located? How can I visit there?
A: All our clients, from home or abroad, are warmly welcomed to visit us. Before you visit our company, we can connect by phone! Our company is located in ZheJiang , China, near the ZheJiang Xihu (West Lake) Dis.ao International Airport. And our factory is in ZheJiang HangZhou, we will arrange cars to there.

Q2. I don’t know what belt I currently use. Can you help me identify my belt?
A: Our online belt identifier can help you narrow down the series and style of your current belt. If you need more specific information on plastic conveyor chain belt parts manufacturers, contact me freely for plastic chains/ belts/ PU/PVC/Rubber belts/ other components and conveyors.

Q3. What can you do If the products were broken?
(1) If goods were broken once you bought from me,I would replace them freely according to the proven photos.
(2) If the goods were broken when you used, we could provide 5 year quality guarantee for plastic conveyor chain belt parts manufacturers under common working environment.

Q4. Does CZPT provide PDF files of products?
A: Yes, in our download center you can find PDF files for a large number of our products.If you can not find what you are looking for, send me your request by email or contact me on Wechat or Whatsapp freely.

Company Type: Manufacturer
Standard: ISO
Delivery Time: Within One Week
Export Market: Global
Transport Package: Cartons or as Per Your Requests
Specification: Standard or non-standard
Samples:
US$ 9/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

sprocket

Sprocket Basics

When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.

size

There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.

Material

Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.
sprocket

Function

A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.
sprocket

maintain

Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.

China factory Har1775 Plastic Flexible Chain Conveyor Parts Injection Machined Sprocket     supplier China factory Har1775 Plastic Flexible Chain Conveyor Parts Injection Machined Sprocket     supplier
editor by CX 2023-05-19

China Best Sales P100f125 China Standard and ISO and ANSI Industrial Transmission Gear Reducer Conveyor Parts Stainless Steel Industrial Conveyor Chain with Link near me manufacturer

Item Description

       Chain No.        Pitch     P       mm                        Roller diameter  d1max  mm Width among inner plates b1min  mm        Pin diameter  d2max  mm        Pin size Inner plate  depth  h2max  mm     Plate thickness   t/Tmax        mm        Tensile   strength        kN/Ibf Average tensile strength  Qo         kN Weight for each meter      q  kg/m
Lmax  mm Lcmax  mm
P100F125 a hundred 22.two 22 eleven.three fifty four.5 fifty eight 32 six a hundred and ten./24728 121 4.45

 

CONVEYOR CHAIN Designed AND Created FOR THE MOST DEMXIHU (WEST LAKE) DIS. OF ENVIRONMENTS

HangZhou Star Equipment Engineering Co.,ltd.  provides the optimum quality components and producing techniques to suit the most arduous of conveyor chain programs  – from the transportation of biomass fuels, to the recycling market, paper & pulp, cement, steel-perform, the wooden industry and foodstuff processing.
Our conveyor chains, sprocket wheels and attachments are case-hardened to attain the the best possible harmony between strength, longevity and resistance to dress in.
Our production is focused on metric pitch conveyor chains that consist of:
Intercontinental Specifications DIN 8167/ISO 1977 M collection
DIN 8165/ISO 1977 FV sequence
SMS 1968 S sequence

Development OF THE CHAIN

Two distinct dimensions of roller chain, displaying construction.
There are 2 sorts of back links alternating in the bush roller chain. The very first sort is inner hyperlinks, having 2 internal plates held together by 2 sleeves or bushings upon which rotate 2 rollers. Inner hyperlinks alternate with the second type, the outer hyperlinks, consisting of 2 outer plates held collectively by pins passing by way of the bushings of the internal hyperlinks. The “bushingless” roller chain is equivalent in operation though not in design instead of different bushings or sleeves keeping the interior plates with each other, the plate has a tube stamped into it protruding from the hole which serves the identical purpose. This has the edge of getting rid of 1 stage in assembly of the chain.

VARIANTS Design and style

Structure of a roller chain: 1. Outer plate, 2. Interior plate, 3. Pin, 4. Bushing, 5. Roller
If the chain is not becoming utilised for a high dress in software (for instance if it is just transmitting motion from a hand-operated lever to a control shaft on a machine, or a sliding door on an oven), then 1 of the simpler sorts of chain might still be used. Conversely, in which added strength but the sleek push of a smaller pitch is necessary, the chain may be “siamesed” alternatively of just 2 rows of plates on the outer sides of the chain, there may be 3 (“duplex”), 4 (“triplex”), or a lot more rows of plates working parallel, with bushings and rollers between each and every adjacent pair, and the same variety of rows of tooth running in parallel on the sprockets to match. Timing chains on automotive engines, for illustration, typically have multiple rows of plates called strands.

USE

An instance of 2 ‘ghost’ sprockets tensioning a triplex roller chain method
Roller chains are utilised in minimal- to mid-velocity drives at all around 600 to 800 toes for every moment even so, at increased speeds, about 2,000 to 3,000 ft for each minute, V-belts are generally employed because of to wear and sound troubles.
A bicycle chain is a form of roller chain. Bicycle chains could have a master url, or could need a chain device for removal and installation. A similar but greater and as a result more powerful chain is used on most motorcycles although it is sometimes replaced by either a toothed belt or a shaft drive, which provide reduce sounds degree and much less maintenance needs.
The fantastic bulk of vehicle engines use roller chains to drive the camshaft(s). Really large performance engines frequently use gear travel, and beginning in the early 1960s toothed belts ended up utilized by some producers.
Chains are also employed in forklifts using hydraulic rams as a pulley to CZPT and decrease the carriage even so, these chains are not considered roller chains, but are labeled as lift or leaf chains.
Chainsaw slicing chains superficially resemble roller chains but are more intently connected to leaf chains. They are pushed by projecting generate backlinks which also serve to locate the chain onto the bar.

Sea Harrier FA.2 ZA195 front (chilly) vector thrust nozzle – the nozzle is rotated by a chain travel from an air motor
A perhaps strange use of a pair of motorcycle chains is in the Harrier Soar Jet, in which a chain push from an air motor is utilised to rotate the movable motor nozzles, making it possible for them to be pointed downwards for hovering flight, or to the rear for standard ahead flight, a system identified as Thrust

Dress in

The impact of put on on a roller chain is to enhance the pitch (spacing of the backlinks), causing the chain to grow longer. Observe that this is thanks to dress in at the pivoting pins and bushes, not from true stretching of the metal (as does occur to some flexible metal elements this kind of as the hand-brake cable of a motor automobile).

With CZPT chains it is strange for a chain (other than that of a bicycle) to use until it breaks, because a worn chain sales opportunities to the rapid onset of put on on the enamel of the sprockets, with supreme failure becoming the decline of all the teeth on the sprocket. The sprockets (in particular the smaller sized of the two) experience a grinding movement that puts a characteristic hook form into the pushed confront of the tooth. (This impact is made even worse by a chain improperly tensioned, but is unavoidable no matter what treatment is taken). The worn teeth (and chain) no longer offers sleek transmission of electricity and this may turn out to be evident from the sounds, the vibration or (in vehicle engines utilizing a timing chain) the variation in ignition timing observed with a timing light-weight. Equally sprockets and chain ought to be changed in these instances, since a new chain on worn sprockets will not last long. However, in significantly less extreme instances it might be feasible to help save the greater of the 2 sprockets, given that it is always the smaller sized 1 that suffers the most dress in. Only in extremely light-weight-excess weight purposes this kind of as a bicycle, or in intense cases of improper tension, will the chain usually jump off the sprockets.

In sector, it is usual to keep track of the motion of the chain tensioner (regardless of whether guide or computerized) or the specific size of a drive chain (one particular rule of thumb is to substitute a roller chain which has elongated 3% on an adjustable travel or 1.5% on a fixed-center generate). A simpler method, notably suited for the cycle or bike user, is to try to pull the chain absent from the bigger of the 2 sprockets, even though making sure the chain is taut. Any considerable movement (e.g. creating it feasible to see via a gap) probably signifies a chain worn up to and outside of the restrict. Sprocket damage will result if the difficulty is ignored. Sprocket put on cancels this effect, and may possibly mask chain use.

CHAIN Toughness

The most widespread evaluate of roller chain’s toughness is tensile strength. Tensile toughness represents how significantly load a chain can withstand below a one-time load ahead of breaking. Just as essential as tensile toughness is a chain’s tiredness energy. The essential aspects in a chain’s exhaustion toughness is the top quality of steel utilised to manufacture the chain, the warmth therapy of the chain components, the quality of the pitch hole fabrication of the linkplates, and the variety of shot in addition the depth of shot peen protection on the linkplates. Other variables can contain the thickness of the linkplates and the layout (contour) of the linkplates. The rule of thumb for roller chain working on a continuous generate is for the chain load to not CZPT a mere 1/6 or 1/9 of the chain’s tensile strength, relying on the variety of grasp back links used (press-in shape vs. slip-in shape)[citation needed]. Roller chains running on a continuous travel beyond these thresholds can and normally do fail prematurely via linkplate fatigue failure.

The regular bare minimum supreme toughness of the ANSI 29.1 steel chain is twelve,five hundred x (pitch, in inches)2. X-ring and O-Ring chains significantly lower put on by indicates of inside lubricants, growing chain existence. The inside lubrication is inserted by implies of a vacuum when riveting the chain together.

CHAIN STHangZhouRDS

Expectations businesses (this sort of as ANSI and ISO) maintain expectations for layout, dimensions, and interchangeability of transmission chains. For instance, the adhering to Desk shows knowledge from ANSI common B29.1-2011 (Precision Electricity Transmission Roller Chains, Attachments, and Sprockets) created by the American Culture of Mechanical Engineers (ASME). See the references for additonal info.

ASME/ANSI B29.1-2011 Roller Chain Regular SizesSizePitchMaximum Roller DiameterMinimum Final Tensile StrengthMeasuring Load25.
For mnemonic reasons, beneath is yet another presentation of important dimensions from the exact same common, expressed in fractions of an inch (which was component of the thinking driving the selection of favored figures in the ANSI standard):
 

WHY Choose US 

one.     Reliable Quality Assurance Technique
two.     Cutting-Edge Laptop-Managed CNC Equipment
three.     Bespoke Remedies from Highly Experienced Specialists 
four.     Customization and OEM Obtainable for Distinct Application
5.     Extensive Stock of Spare Components and Equipment
six.     Well-Created Around the world Marketing and advertising Network 
seven.     Efficient Following-Sale Provider Technique

We are not just a manufacturer and supplier, but also an market specialist. We function pro-actively with you to offer you skilled suggestions and solution recommendations in buy to finish up with a most expense efficient merchandise offered for your particular software. The consumers we provide globally range from end end users to distributors and OEMs. Our OEM replacements can be substituted where ever necessary and ideal for each mend and new assemblies.

Drum sprockets: These sprockets are typically broader to enhance the total surface area make contact with among the sprocket and chain. This decreases anxiety on equally sections, generating a more resilient system for hefty haul conveyors.
Ep prefabricated metal sprockets are manufactured of C1045 steel, induction hardened or warmth-dealt with steel, four hundred – 500 BHN hardness. Make sure you specify the resources you want. Except if in any other case requested, the outside the house diameter of the hub should be enough to accommodate the required holes and keyways. Keys to these things are not supplied unless requested or installed on the shaft. Break up sprockets for welding or split sprockets for bolts offer an affordable way to put in sprockets on shafts the place elimination of the shaft assembly is prohibited. A lot of sizes of sprockets are geared up with holes, keyways, and set screws. Discs or partly concluded sprockets are also stocked. For prolonged sprockets and idlers, specify the chain dimensions employed.

China Best Sales P100f125 China Standard and ISO and ANSI Industrial Transmission Gear Reducer Conveyor Parts Stainless Steel Industrial Conveyor Chain with Link     near me manufacturer

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Hot morse roller chain China in Cuito Angola Product Steel Conveyor Short Pitch Precision Standard Roller Chain Hardware Steel with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Hot morse roller chain China in Cuito Angola  Product Steel Conveyor Short Pitch Precision Standard Roller Chain Hardware Steel with ce certificate top quality low price

We – EPG Group the greatest Chain and agricultural gearbox manufacturing facility in China with 5 diverse branches. For a lot more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

We can offer a total-range of power transmission products like chains, sprockets and plate wheels, pulleys, gearboxes, motors, couplings, gears and racks pto shaft, agricultural gearboxes. ISO Our item variety also covers locking assemblies (clamping components/locking unit), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, common joint, rod finishes and yokes. 9001 accredited company of precision roller chains. Types include solitary and multiple strand, hollow pin, side bow, rollerless, self-lubricating, straight sidebar, double pitch, brushed, nickel plated, armor coated, 304 stainless steel, leaf, hoist and O-ring, citrus, sorting and caterpillar roller chains. Common roller chain is offered with pitches from 1/2 to 3 inches. Chain quantities are established by multiplying the pitch by 80 (a 1/2 inch pitch chain would be a No. forty chain). A hyphenated suffix suggests numerous strands. For Totally free Samples
Seasoned Things
Prompt Shipping
Worldwide Approvals

Why select us?
1.Xihu (West Lake) Dis. EPT Chain CO.Ltd proven in 2001, our organization has been rated best ten amongst domestic chain market.
2.We specialized in creating all types of chains and a plenty of specific chains, such as A or B series chains, conveyor chains, driving chains, cement chains, agricultural chains and so on.
3.Prodcucts strictly implement the global stHangZhourd(ISO),the Chinese stHangZhourd(GB),American stHangZhourd(ANSI),Germany stHangZhourd(DIN),British stHangZhourd(BS) and Japanese stHangZhourd(JIS) and EPT stHangZhourds,which can meet the specifications of the stHangZhourd of various nations around the world.

Should any of these products be of intere EPT to you,We will content to give you a quotation upon receipt of your specifications.

We search ahead to obtaining your inquriy shortly.

 

The use of original tools manufacturer’s (OEM) element quantities or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating solution use and compatibility. Our company and the outlined alternative components contained herein are not sponsored, accepted, or manufactured by the OEM.

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Hot morse roller chain China in Cuito Angola  Product Steel Conveyor Short Pitch Precision Standard Roller Chain Hardware Steel with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Hot morse roller chain China in Cuito Angola  Product Steel Conveyor Short Pitch Precision Standard Roller Chain Hardware Steel with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Hot morse roller chain China in Cuito Angola  Product Steel Conveyor Short Pitch Precision Standard Roller Chain Hardware Steel with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Hot morse roller chain China in Cuito Angola  Product Steel Conveyor Short Pitch Precision Standard Roller Chain Hardware Steel with ce certificate top quality low price

Forged made in China – replacement parts – in Ogbomosho Nigeria Scraper Conveyor Chain with ce certificate top quality low price

Forged  made in China - replacement parts -  in Ogbomosho Nigeria  Scraper Conveyor Chain  with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Forged Furcate Chain, P142H
Our drop forged rivetless chain are mo EPT competitive and are of high quality. There are many items available. Please feel free to contact us.
Available products:
1) X348, X458, 468H, X678, 698, 698H, F100x16, F100x17, F160x24 drop forged
Rivetless chain
2) Forged chain: 78, 74, 62, 57, 55
3) Relevant trolleys,carriers and spare parts
4) Relevant wheels
If you need, please let us know. Our quality is high and welcomed at European market, USA market, Brasil market, Korean market, Indian market and so on.

I-beam monorail systems components.
RIVET LESS CHAIN, POWER & FREE TROLLEY, BEARING, “H” ATTACHMENTS

Our Drop Forged Chain and trolley can be used widely in aggregate, amusement park rides, asphalt paving, automotive industry, bakery ovens, bottling, bucket elevators, car dumper, car wash, case conveyors, cement plants, citrus processing, clean grain and return elevators, coal preparation, construction equipment, conveyors, cotton tramper, dairy handling, fertilizer conveying, flight conveyors, food processing, fore EPT products, grain handling, heavy duty conveyors, high-temperature industrial ovens, jack ladder, log handling, material handling, meat packing, mining, overhead conveyors, power drives, produce washdown, pulp and paper, recycling, refineries, roofing plants, rubber manufacturing, stackers, steel mills, sugar harvesting, sugar processing, trolle, conveyors, utilities, water treatment

Material

Alloy steel,carbon steel
Process Assembled
Heat treatment Case hardening,   quenching
Surface treatment Blackened, Zinc plated, Nickel galvanized, sand blasting or as per customer’s damand
Performance High precision, high wear resistance, low noise, smooth and steady, high strength
Model number X348, X458, 468H, X678, 698, 698H, F100x16, F100x17, F160x24
Packaging plywood case

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Forged  made in China - replacement parts -  in Ogbomosho Nigeria  Scraper Conveyor Chain  with ce certificate top quality low price

Forged  made in China - replacement parts -  in Ogbomosho Nigeria  Scraper Conveyor Chain  with ce certificate top quality low price

Forged  made in China - replacement parts -  in Ogbomosho Nigeria  Scraper Conveyor Chain  with ce certificate top quality low price

Large made in China – replacement parts – in Grande Vitoria Brazil Pitch Metal Chain Steel Plate Conveyor Belt Chain with ce certificate top quality low price

Large  made in China - replacement parts -  in Grande Vitoria Brazil  Pitch Metal Chain Steel Plate Conveyor Belt Chain with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Large pitch welded conveyor chain for steel plate is your good choice for steel factory!

Flat top chains, also called flat top chain plate, slat top chain, table top chain plate, it is an efficient chain plate used in the glass industry, food industry, wine and EPT industries for conveying. The flat top chains can be made of carbon steel, stainless steel or galvanized steel for high tensile strength and bearing load. Compared with balanced weave belt, it supplies a flat and smooth surface for high performance conveying. We can supply you all kinds of flat top chains in different specs and materials. We can customize the flat top chains according to your equipment and requirements.
 

Features :

  • High performance. The flat and smooth surface has little friction for high performance conveying.
  • High friction. The rubber top chain plates improve the surface chain to protect products from falling down.
  • Smooth and steady conveying. Straight running and sideflexing types to suit different conveying line.
  • Easy cleaning and low maintenance. Clean them with flow water or soak in water for easy and fa EPT cleaning.
  • Corrosion and ru EPT resistance. Stainless steel and EPT anti-corrosive materia EPT ensure the flat op chain a long service life.
  • High load capacity. The chain plates have larger loading surface than balanced weave conveyor belts and EPT conveyor belts made of steel wires. In this way, it can load more products and for heavy duty applications.
  • Customization. All the products can be customized according to your requirements and drawing.
  • Wide range of applications. It serves for lots of conveying applications in many industries, such as beverage, food processing, glass bottling filling.

Application :

Flat top chains have a wide range of applications, detai EPT are as follows:

  • Food processing.
  • Quick frozen products.
  • Food industry.
  • Soft drinks industry.
  • Breweries.
  • Glass bottling filling.
  • Wire industry.
  • Dairy.
  • Cheese production.
  • Beer production.
  • Incline conveying.
  • CHangZhou.
  • Pharmaceutical packing.


 

Engnieering chain and EPT Roller chain

The engineering chain and conveyor chains listed on this page are produced by Xihu (We EPT Lake) Dis.wu, a morden conveyor chain manufacturer based in China, these products are especially designed for automated logistics equipment , material handling equipment, engineering vehicles, and more.  We produce chains according to your customized requirements.
 

Chain Type  Welded chain,                      Roller chain,                         
Hollow pin chain ,                Drawbench chain,                   
Leaf chain,                          EPT chain,               
Paver chain,                        Bucket elevator chain,       
Skid chain,                          Sugar mill chain,                    
Double flex chain,               Sharp top chain,                  
 Forged chain,                    Ca EPT chain ,                  
FV/FVC/FVT series chain,    Scraper chain                      
M/MVT/MC serise chain,                                        
Z/ZC serise chain,                                            
stainless steel chain ,               
Sprocket
Material  Carbon steel or Alloy with heat treatment /stainless steel             (through harden/case  harden/induction harden)
Surface Shot Peening                                                                            Zinc-plated                       
Dacromet                           Blacking                                                     
Lubricating ,free of rust
Quality inspection Inspect length precision and Hardness,                                    
Pre-stretching after assembling,
Package Polybag+plywood case
Application Sugar mill,cement mil,l metallurgy industry,             
Automobile industry,grain machine.mining machine  and so on

 

 

For more than 20 years, we have focused on the custom chains.

For more than 20 years, We have done hundreds of different kinds of industrial chains.

So we have a wealth of custom chain experience.

Here are some of the varieties of the chains.

EPT offers high quality precision roller chains for transport and driving purposes.  

These precision roller chains are used in all kinds of industrial applications with various degrees of tension and various environment factors.
Through continuous innovation we increasingly succeed in finding adequate solutions for various degrees of tension and for all kinds of environmental factors. 

The roller chains are made of high quality types of steel, and are then subjected to various material treatments before assembling. 

Measurements meet DIN / ISO / ANSI standards.

Roller chain European standard according to DIN 8187

The whole range of our chain programme includes:

• Standard DIN / ISO / ANSI roller chains
• Standard DIN / ISO / ANSI roller chains heavy series
• Steel version / Stainless Steel / galvanized / nickel-plated / high corrosion resistant
• Standard attachments / customized attachments
• Side Bow roller chains
• Hollow pin roller chains
• Accumulation chains
• Maintenance free roller chains (self lubricating roller chain)
• Oilfield chains
• Navy diesel chains 

Available in the following versions:

• Steel
• Stainless steel
• Galvanized steel
• Nickel-plated steel
• H.C.R. High Corrosian Resistance

Possibilities:
• with attachments
• with extended pins
• customized

Available with standard attachments:

• Roller chain with attachments vertical type according to vertical attachments according to DIN / ISO standard
• Roller chain with attachments bent type according to DIN / ISO standard
• Roller chain with extended duplex or triplex chain pin

Why Choose EPT ? 

1. HangZhou Xihu (We EPT Lake) Dis.wu chain transmission manufacturing co.,Ltd is a professional manufacture of chains,and is the member unit of China National technical committee for standardization for china transmission,

2. We occupied an area over 100 thousand sqm,owned standard workshops over 30 thousands sqm and over 300sets of professional equipments to produce chains in large-scale as well as complete inspection and te EPT devices.

3. We passed through the authentications of ISO9001:2000 international quality system and ISO14001 environmental management system .

4. We have 75% of products which are exported to Europe,America,Japan , Southea EPT Asia ,and so on,

5. More than 10years factory experience  ,Nearly all the parts are produced by our own factory,therefor we can control the co EPT and quality.

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Large  made in China - replacement parts -  in Grande Vitoria Brazil  Pitch Metal Chain Steel Plate Conveyor Belt Chain with ce certificate top quality low price

Large  made in China - replacement parts -  in Grande Vitoria Brazil  Pitch Metal Chain Steel Plate Conveyor Belt Chain with ce certificate top quality low price

Large  made in China - replacement parts -  in Grande Vitoria Brazil  Pitch Metal Chain Steel Plate Conveyor Belt Chain with ce certificate top quality low price

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Factory what is 420 roller chain China in Safaqis Tunisia Direct Supply Roller Chain for Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Factory what is 420 roller chain China in Safaqis Tunisia  Direct Supply Roller Chain for Conveyor with ce certificate top quality low price

We – EPG Group the most significant Chain and agricultural gearbox manufacturing facility in China with 5 distinct branches. For a lot more details: Cellular/whatsapp/telegram/Kakao us at: 0086-13083988828

Ever-Electrical power Group CO., LTD. IS Professional IN Creating ALL Sorts OF MECHANICAL TRANSMISSION AND HYDRAULIC TRANSMISSION LIKE: PLANETARY GEARBOXES, WORM REDUCERS, IN-LINE HELICAL Equipment Velocity REDUCERS, PARALLEL SHAFT HELICAL Gear REDUCERS, HELICAL BEVEL REDUCERS, HELICAL WORM Gear REDUCERS, AGRICULTURAL GEARBOXES, TRACTOR GEARBOXES, Automobile GEARBOXES, PTO Generate SHAFTS, Particular REDUCER & Associated Equipment Factors AND OTHER Associated Goods, SPROCKETS, HYDRAULIC Technique, VACCUM PUMPS, FLUID COUPLING, Equipment RACKS, CHAINS, TIMING PULLEYS, UDL Velocity VARIATORS, V PULLEYS, HYDRAULIC CYLINDER, Gear PUMPS, SCREW AIR COMPRESSORS, SHAFT COLLARS Lower BACKLASH WORM REDUCERS AND pto shaft, agricultural gearboxes SO ON. The We will offer ideal providers and higher top quality merchandise with all sincerity. a specialized supplier of a full variety of chains, sprockets, gears, gear racks, V-belts, couplings and reducers, pto shaft, agricultural gearboxes….ongoing enlargement of our ball bearings, mounted models and power transmission solution traces, alongside with our consideration to detail and good quality, has authorized EPG to acquire wide acceptance to a assorted consumer foundation. Distributor of precision roller chains made from carbon metal. Accessible with .200 to 1.875 in. roller dia. Flat top, multi-flex and conveying chains are also offered.

Factory Direct EPT Roller Chain For Conveyor
 

Stainless Steel Roller Chains,Stainless Metal EPT chain, Stainless metal chainn for bottle conveyor line which is utilized on bottle filling conveyor lines, EPT stHangZhourd ss chain or particular ss chains (SS304 chain, SS316 chains, SS316L chains, SS conveyor chains, SS304 conveyor chain, SS316 conveyor chain) all offered
We have a lot of OEM chain factory buyer from Europe and our conveyor chains high quality is similar to the A good quality in the planet.

We are skilled provider of chains
one) Chain NO. : 08A to 48A, 04B to 48B

2) Any particular needs about pins, attachments, and plates can be meet.

3) Shade obtainable: organic, yellow, blue, and so on

We are the leading best Chinese chain manufacturer, and are specializing in different substantial quality Agricultural Chain. We comply with
DIN, ANSI, or ISO stHangZhourd as per customer’s request.

We can also source chain as beneath:
one. Roller chains with straight facet plate (A sequence) 08A to 48A
two. Roller chains with straight facet plate (B collection) :04B to 48B
three. Brief pitch conveyor chain with attachments : O8A to 16B with attachment
four. EPT chain with unique attachments (A series) : C08A-1 to C32A-3
five. EPT chain with special attachments (B sequence) : C08B-1 to C32B-three
six. EPT chain with particular attachments : A1,K1,WK1,WK2,WA1,WA2
7. Limited pitch conveyor chain with prolonged pins :40HP,50HP,60HP,80HP.
eight. EPT chain with specific extended pins
nine.Double pitch conveyor chains
ten. Double pitch conveyor chain with attachments
11.Double pitch conveyor chain with unique attachments
twelve.Double pitch conveyor chain with prolonged pins
thirteen. Double furthermore chains
14. Lumber conveyor chain & attachments
15. Sharp best chains
16. Roller chain with vulcanised elastomer profiles
17.Roller chain with U kind attachments
18.Roller chain with plastic attachments
19. Plastic chains
twenty. Roller chain with plastic rollers
21.Different conveyor chains
22. EPT chains(M sequence)
23. EPT chain with attachments(M collection)
24. EPT chains(MT series)
twenty five. Hollow pin conveyor chains(MC collection)
26. EPT chains(FV sequence)
27. EPT chain with attachments(FV series)
28. EPT chains(FVT series)
29. Hollow pin conveyor chains(FVC collection)
thirty. Non-stHangZhourd hollow pin conveyor chains
31. EPT chains(Z collection)
32. EPT chain with attachments(Z sequence)
33. EPT chains(ZE series)
34. Hollow pin conveyor chains(ZC series)
35. EPT chains
36. EPT chain with attachments
37.Steel chains for sewage disposal
38. Particular conveyor chains
39. EPT motion conveyor chains
40. EPT chains for hoisting
forty one.Welded conveyor chains
42. Roller chains for textile equipment
43.Roller chains for folio transport(Gripper)
forty four. Support chains
forty five. 78PF1 conveyor chains
46. EPT chains for paper mill
forty seven. EPT chains for metallic decorating technique
48.To prime chain-curved movement
forty nine.Double flex chains
fifty. Hollow pin chains
fifty one. EPT bush chains
52. EPT bush chain with attachments
fifty three. Escalator action-chains
54. EPT chains for steel mill
55. Scraper conveyor chains
fifty six. Welded steel chains
fifty seven.Welded steel chain with attachments
fifty eight. Metal pintle chain
59. Metal pintle chain with attachments
60. EPT chains for fibreboard products
sixty one. EPT chains for crawler asphalt paver
sixty two. Palm oil chains
63. Sugar chains
64. Flat-prime conveyor chains

Product Title

EPT Metal Transmission Industrial Lifting Overhead EPT Roller Chain

Measurement

A series

Pitch

four.7625-seventy six.2mm

Materials

Carbon metal/stainless metal(SS304,SS316)

Colour

Character

StHangZhourd

ISO DIN GB ANSI

Duration

StHangZhourd size 1.524M/box or 10 toes/box

EPT Industry Co., Ltd. is a specialized supplier of a total range of chains.
Thanks to our sincerity in providing be EPT service to our consumers, understanding of your needs and overriding perception of responsibility toward filling buying demands, we have obtained the tru EPT of buyers throughout the world. Obtaining accumulated precious experience in cooperating with foreign clients, our products are offering nicely in the American, European, South American and Asian marketplaces.Our products are created by modern day computerized machinery and equipment. Meanwhile, our items are made according to substantial good quality stHangZhourds, and complying with the international advanced stHangZhourd criteria.
With numerous years’ encounter in this line, we will be reliable by our benefits in aggressive cost, 1-time delivery, prompt reaction, on-hand engineering assist and good after-revenue services.
Moreover, all our creation processes are in compliance with ISO9001 stHangZhourds. We also can design and style and make non-stHangZhourd merchandise to fulfill customers’ specific demands. Quality and credit are the bases that make a corporation alive. We will provide be EPT services and large high quality items with all sincerity. If you want any info or samples, make sure you speak to us and you will have our soon reply.

FAQ:

Q1: Are you investing business or manufacturer ?
A: We are manufacturing facility.

Q2: How extended is your shipping time and cargo?
one.Sample Direct-occasions: usually 30 workdays.
two.Generation Direct-times: 60 workdays soon after obtaining your deposit.

Q3. What is your phrases of payment?
A: T/T thirty% as deposit, and 70% ahead of shipping.
We’ll show you the images of the merchandise and deals prior to you shell out the equilibrium.

This autumn: What is your positive aspects?
one. Maker,the mo EPT aggressive value and good quality.
2. EPT technological engineers give you the be EPT assist.
3. OEM is offered.
four. Rich stock and rapid delivery.

Q5. If you can not uncover the solution on our internet site,what do you up coming?
You should ship us inquiry with merchandise images and drawings by electronic mail or EPT ways and we’ll check out

 

 

The use of authentic tools manufacturer’s (OEM) component figures or emblems , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our firm and the listed substitution parts contained herein are not sponsored, authorized, or created by the OEM.

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Factory what is 420 roller chain China in Safaqis Tunisia  Direct Supply Roller Chain for Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Factory what is 420 roller chain China in Safaqis Tunisia  Direct Supply Roller Chain for Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Factory what is 420 roller chain China in Safaqis Tunisia  Direct Supply Roller Chain for Conveyor with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Factory what is 420 roller chain China in Safaqis Tunisia  Direct Supply Roller Chain for Conveyor with ce certificate top quality low price

Best made in China – replacement parts – pintle Chain & sprocket manufacturer : Roller large roller conveyor chain China in Malappuram India Chain with Triplex with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Roller large roller conveyor chain China in Malappuram India  Chain with Triplex  with ce certificate top quality low price

We – EPG Team the largest Chain and agricultural gearbox manufacturing unit in China with 5 different branches. For much more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13083988828

Our item variety also handles locking assemblies (clamping components/locking system), taper bushes, QD bushes, bolt-on hubs, pto shaft, agricultural gearboxes,torque limiters, shaft collars, motor bases and motor slides, chain detachers, chain guides, universal joint, rod finishes and yokes. ISO EPG has been efficiently accredited by ISO9002 High quality Management Technique, ISO9001 Quality Management System, API certificate, ISO/TS16949:2002 and ISO10012 measurement management method. 9001:2000 & AS 9100B certified custom producer of roller chains. Requirements of roller chains contain .1475 in. to .3750 in. pitch, 5.9 in. to 35.4 in. length, a hundred and eighty lbs. to 1529 lbs. tensile load capacity & .035 lbs. to .276 lbs. bodyweight/ft. EPT chains, both normal and non-common, are produced of: ○ Higher top quality steels: dimensions and tailored chemical composition for the various chain elements ○ The most productive manufacturing processes: • Special strategy for the generation of bushes improving the chain use resistance ( EPT know-how) • Plates developed by multi-stage processing tools making certain a typical pitch ( EPT technology) ○ Ample mechanical and warmth remedies of chain areas: • Shot peening • Area finishing • Situation hardening, carbonitriding, quenching, tempering … • EPT®treatment • Freezing therapy • Corrosion defense coatings (GEOMET, zinc, nickel plating, …) DE EPT EPT ABO EPT EPT CHAIN 

HangZhou EPT EPT Chain Transmission Co, . Ltd is launched in 1997, has been a manufacturer in different stHangZhourd &  special customized created chains & sprockets top quality provider in HangZhou, China. Manufacturing facility has a lot more than two hundred personnel and handles an area of 1,3000 m² . We are a member of China Chain Transmission StHangZhourdized Approach Committee and China EPT Equipment Parts Industrial Association.

Our merchandise are extensively utilised by good quality Stainless Steel 300/four hundred/600 sequence and duplex stainless metal,  which are widely used in the industries this kind of as Foods Procedure, Pharmaceutical Chemica EPT Metallurgy, Automobile: +86~13083988828 Manufacting, House Appliance Producing, Textile Business and Electronics Industry, Agricultural Machines, and so on.
All chains assembly strategy indexes affirm to stHangZhourds of ISO 9001:2008 and GB/T 19001-2000idt.

Packaging Details

FAQ
      

1. Are you company or trade Company?
We are a factory launched in 1997 with trade team for international provider.

two. What phrases of payment you usually use?
T/T 30% deposit and 70% yet again EPT document, Western Union, L/C at sight

three. What is your direct time for your goods?
Typically 35 times after verified purchase. 30 days could be accessible in low season for some items (during May to July), and 45 days throughout new calendar year and scorching year ( Jan to March).

four. Samples
For customers who want sample affirmation just before purchasing, please bear in thoughts that the pursuing plan will be adopted:
one) All samples are free of cost with the optimum worth not exceeding USD one hundred.
2) The courier co EPT for the very first-time sample sending will be billed for by the consignee. We will send out the samples with freight to be gathered. So make sure you tell your account with FedEx, UPS, DHL or TNT so that we can continue immediately.
3) The 1st-time courier co EPT will be entirely deducted from the agreement worth of the demo cooperation.

Make contact with Information:
 

Athena
Ad: Lingfeng Industrial Park, HangZhou Metropolis, China
T:    13814862167
Instagram:chain.fubang
W: http:// 

The use of authentic equipment manufacturer’s (OEM) element figures or trademarks , e.g. CASE® and John Deere® are for reference reasons only and for indicating item use and compatibility. Our business and the shown substitution components contained herein are not sponsored, authorized, or manufactured by the OEM.

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Roller large roller conveyor chain China in Malappuram India  Chain with Triplex  with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Roller large roller conveyor chain China in Malappuram India  Chain with Triplex  with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Roller large roller conveyor chain China in Malappuram India  Chain with Triplex  with ce certificate top quality low price

Best  made in China - replacement parts - pintle Chain & sprocket manufacturer : Roller large roller conveyor chain China in Malappuram India  Chain with Triplex  with ce certificate top quality low price