Tag Archives: roll forming machine

China wholesaler Fully Automatic Metal Roof Sheet Roll Forming Machine with Great quality

Merchandise Description

This Generating Process Sketch As Underneath Image:

This Profile Drawing As Underneath Photograph:

 

Standard Parameter

1 Product Parameters
two Model NO. YX29-two hundred-one thousand
3 Content Pre-painted galvanized sheet
four Thickness .35-.8 mm
five Produce Power 550 MPa
six Feed Width 1220 mm
7 Successful width a thousand mm
eight Roll Phases twenty Levels
9 Shafts Diameter ф75/ninety five mm
10 Principal Motor Power 11 KW
11 Hydraulic Team Electrical power 5.5 KW
  Max Line pace of roll Previous Approx. 20-25m/min
thirteen Electric powered Common In accordance to regional voltage

 

 

Machine Parts

A.  10TON*1250MM HYDRAULIC UN-COILER WITH COIL Car

Hydraulic system to grow coil inner gap, Pump motor: 5.5KW
Taper wedge increase kind
Double stage increasing palms with 2 coil bore variants of 480-530 and 580-63
Load Ability: Max. 10 Tons Coil Width Max. 1250mm
Coil Outer-diameter Max. 1500mm
Retarding Motor to switch the coil, Motor: 5.5KW
Maintain arm on the leading, to stay away from coil become unfastened when end to be packed. 
The arm to be pushed by pneumatic cylinder, handbook control
The air supplier must be supply by the consumer
With coil car 
Up/Down stroke of Coil Automobile: Max. 450mm
Forward/backward stroke of Coil Auto: Max. 2000mm

B.  Entry roller & Manual Pre-shearing gadget           Un-powered             
Intelligent minimize handle, to minimize off the stop of the closing piece of sheet only
Operating thickness up to .8mm

 

CPolythene Movie-on Device    
Un-run film-on device to protect plastic movie on the floor of sheet 

D.   Cold Rolling Mills
Feeding section with information
Equipment/Sprocket driving twenty-step to type
New stand frame style
Rollers produced from forty five#, CNC lathes, hard Chrome Coated
Shafts Diameter=ф75/95mm, Precision Machined
Major motor =eleven KW, Frequency velocity control
Max Line pace of roll Former: Approx. twenty-25m/min            
Safety Mesh Go over (entire mesh variety) Over Roll-former To Avoid Palms Go Inside

E.  Hydraulic Chopping System
Cease to cut, Publish minimize, No Blanking minimize
Reducing resource materials : Cr12, Heat treatment method
Pump motor =5.5KW

F.   PLC Management System
       Control the quantity & chopping length instantly
       Combined with: PLC, Contact Screen, CZPT (SIEMENS), Encoder (Omron), Distant Management and so forth
       Cut-to-length tolerance≤±2 mm
       Control Voltage 24V

G. ten METERS PNEUMATIC STACKING PALLET
Stacking Duration Max. ten meters
Pile up the sheet soon after slicing automatic.
Outfitted with a bottom pallet to be pull out by motor pushed
Help arm motion in vertical direction, pushed by pneumatic program
Action managed by Pneumatic program.
The air source presented by the person

 

 

 

Right after-Sale Support

In proper operation & sustaining, the device is confirmed for 1 yr given that leaving our manufacturing unit excludes the electric elements.
Set up:
If set up is essential, WE will dispatch a technician to the buyer’s manufacturing unit abroad to aid regulating the equipment with charge free of charge. The consumer must support US to get the Chinese technician’s visa and must spend for the roundtrip air ticket and the regional lodging.
If set up is needed, the buyer shall make the adhering to preparing just before arrival of professionals.
 

Conditions Of Trade

one.Deal & Shipment: Facility water-evidence packing, Management cabinet packed in wooden packing.
2.Payment: 30%payment by T/T is required as deposit inside of a week considering that the deal signing day.70% payment by T/T is needed before the equipment be send out out of factory.

Over time, the sprocket teeth use out thanks to friction brought on by the continuous physical get in touch with amongst the sprocket enamel and the sprocket. ep manufactures wise tooth sprockets with put on indicator pins. These visible use indicators inform operators and inspectors when sprockets are even now doing work properly and when they need to have to be replaced.
Hold your technique on the cutting edge with ep sprockets and find out different quality manufacturers. Ep sprockets are higher-top quality heat-dealt with steel to face up to large shock loads, resist wear and offer a lengthy services existence. Alloy and stainless metal sprockets are also obtainable for additional corrosion resistance and meals-grade purposes

China wholesaler Fully Automatic Metal Roof Sheet Roll Forming Machine     with Great quality

China OEM Yx19-74-740 Roll Forming Machine for Corrugated Profile with Good quality

Item Description

This Producing Method Sketch As Beneath Photo:

This Profile Drawing As Underneath Photo:

Common Parameter

one Item Parameters
two Product NO. YX19-74-740
3 Substance Pre-painted galvanized sheet
4 Thickness .18-.3 mm
five Produce Strength 550-600 MPa
6 Feed Width 890/895/900 mm
seven Efficient width 740 mm
8 Roll Levels 24 Stages
9 Shafts Diameter ф75 /95 mm
10 Primary Motor Electricity 30 KW
eleven Hydraulic Group Electrical power 5.5 KW
twelve Max. Line Pace Of Roll Previous Approx.40m/min
13 Electric Normal According to regional voltage

 

 

Device Components 

A.   10Ton*1250mm Hydraulic un-coiler with coil auto
Hydraulic program to grow coil inner gap, Pump motor: 5.5KW
Taper wedge expand variety
Double stage growing palms with 2 coil bore variations of 480-530 and 580-630
Load Capability: Max. ten Tons Coil Width Max. 1250mm
Coil Outer-diameter Max. 1500mm
Retarding Motor to turn the coil, Motor: 7.5KW
Sustain arm on the best, to avoid coil turn into loose when quit to be packed.
The arm to be driven by pneumatic cylinder, manual management
The air supplier need to be supply by the person
With coil vehicle
Up/Down stroke of Coil Auto: Max. 350mm
Forward/backward stroke of Coil Car: Max. 2000mm

 

B.  Entry bench and Handbook pre-shearing device     Un-powered
Doing work thickness: up to .5mm
Sensible lower control, to cut off the conclude of the last piece of sheet only

C.  Cold Rolling Mills 

Feeding area with guide
Gear/Sprocket driving24 phases to type
Wall-plate body layout
Rollers made from 45# steel,CNC lathes,challenging chrome coating 
Shafts Diameter=ф75/95mm, Precision Machined
Primary motor =30KW,Frequency pace handle
Max line speed of roll former: Approx.40m/min
Because of to slender and challenging material. Never make at max. Line speed.
Generation velocity: 20-29M/min
Safety Mesh Go over (full mesh variety) Above Roll-previous To Keep away from
Fingers Go Within
The picture beneath is only for your reference:

D.  Hydraulic Reducing Unit
Cease to lower, Post lower, No Blanking cut
Pump motor =5.5KW
Chopping resource content : Cr12, Heat treatment method
The adhering to picture is for your reference only

E.   PLC Management Technique
Control the amount & reducing size instantly
Merged with: PLC, Contact Monitor, CZPT (SIEMENS), Encoder (Omron), Distant Control and so on
Cut-to-size tolerance≤±2 mm
 Control Voltage 24V

F.  6 METERS PNEUMATIC STACKING PALLET
Stacking Size Max. 6 meters, Min. 1 meter
Pile up the sheet following reducing automated.
Equipped with a bottom pallet to be pull out by motor driven
Assist arm action in vertical course, driven by pneumatic program
Action managed by Pneumatic technique.
The air supply provided by the user

 

 

 

Right after-Sale Support

In proper operation & keeping, the equipment is guaranteed for 1 calendar year considering that leaving our manufacturing unit excludes the electrical elements.
Installation:
If installation is needed, WE will dispatch a technician to the buyer’s manufacturing facility abroad to aid regulating the machine with demand cost-free. The purchaser should aid US to get the Chinese technician’s visa and ought to shell out for the roundtrip air ticket and the regional lodging.
If set up is required, the purchaser shall make the pursuing planning before arrival of experts.
 

Conditions Of Trade

one.Bundle & Cargo: Facility water-evidence packing, Manage cupboard packed in wood packing.
2.Payment: 30%payment by T/T is needed as deposit inside of a 7 days because the agreement signing day.70% payment by T/T is needed ahead of the equipment be deliver out of manufacturing facility.

System performance is highly dependent on the conversation of the sprockets, which means that the sprockets you pick generate the good results of your procedure. Make the appropriate and effortless choice with ep’s sprockets. Tsubaki gives chain and sprocket production abilities. The chain meshes properly with the sprockets for long provider daily life and dependable efficiency. This signifies lengthy-phrase savings and real price for your functions. Minimize routine maintenance downtime, increase productivity and reduce alternative costs
Sprockets are made to ISO606 and ASME B29.one hundred specifications, offered in plate, one and double hub configurations, made from high high quality carbon metal, optional tapered bushings simplify set up and removing, treatments offered upon ask for, such as black oxide

China OEM Yx19-74-740 Roll Forming Machine for Corrugated Profile     with Good quality