Solution Description
Metal Production Slicing resource Metal Bar Chopping equipment rebar cutter
Item Description
The scrap metal chopping device is a particular products for cutting limited metal bars and chopping the joints. It is primarily employed for the processing of metal scraps prior to they are returned to the furnace. Used in waste metal recycling plants.
Working Principle
The scrap steel reducing device is pushed by the motor to drive the speed reducer to rotate, and then the velocity reducer operates via the sprocket transmission gearbox to preserve the cutter doing work continuously, so as to lower the steel bar.
Item Feature
one. Automatical chopping
The content is automatically dropped, and the efficiency is really substantial.
two. Double feeding,double efficiency
Two feeding cut at the very same time,
three. The feed technique has a large fault tolerance rate
Marginally curved metal bars can be processed(as extended as they do not CZPT 90 levels).
4. The cutter is straightforward to disassemble and replace
five. Specific knife body content and processing technology
4 face cutter head (1 use can be utilized for yet another head) can be changed, a knife top 4 knife, greatly prolonged the minimize
The provider daily life of the knife.
6. Minimal sounds
The motor load is reasonably easy, impact on the power grid.
seven. Straightforward principle
Hassle-free to upkeep and restore
8. Compact framework, reliable and reputable.
bolstered body, tiny measurement
Merchandise Parameters
| Metal Bar Reducing Device | |||
| Model | YG-twenty five | YG-32 | YG-32 |
| Software Substance | Φ6mm-25mm | Φ6mm-32mm | |
| Motor | Electric ,380V,50HZ,3phase | ||
| Power | seven.5kw | 11kw | 15kw |
| Reducing Velocity | 35times/min | 100times/min | 150times/min |
| Functioning Effectivity | 700kg/h | one.5ton/h | 2ton/h |
| Feeding Duration | 75mm | 95mm | 95mm |
| Device Size | one thousand*one thousand*800mm | 1200*1200*1000mm | 1200*1700*1000mm |
| Bodyweight | 400kg | 1100kg | 1400kg |
Solution Details
Company Information
ZheJiang CZPT Machinery Co., Ltd. is a large equipment producing company which focuses on study and growth, manufacturing(42 enginers) and revenue (one hundred twenty product sales individuals) of metal bar and pipe device,constructing construction machinery, bridge building equipments and so on.
We thinks that good good quality can give us survival, hence we only provide you best merchandise. All the items with large quality meet worldwide requirements and are very approximated by all clientele at property and abroad.
All the employees in our business are professionally qualified, so we can advocate you the most acceptable equipment. Each device will be strictly examined before shipping and delivery. Any query about the equipment will be replied inside of 24 several hours. Welcome you
Make contact with Us for further details
Ep prefabricated metal sprockets are made of C1045 steel, induction hardened or warmth-dealt with metal, four hundred – 500 BHN hardness. You should specify the supplies you require. Except if or else requested, the outside the house diameter of the hub need to be ample to accommodate the needed holes and keyways. Keys to these products are not supplied until asked for or mounted on the shaft. Break up sprockets for welding or break up sprockets for bolts offer an cost-effective way to put in sprockets on shafts the place elimination of the shaft assembly is prohibited. A lot of dimensions of sprockets are geared up with holes, keyways, and established screws. Discs or partly concluded sprockets are also stocked. For extended sprockets and idlers, specify the chain dimension utilized.
The teeth of a one pitch sprocket mesh with 1 tooth for each sprocket. Double pitch sprockets look like solitary pitch sprockets, but the chain only meshes with the other teeth. This means that a double-pitch sprocket has the very same number of enamel as a single-pitch sprocket, but only fifty percent of the tooth are engaged with the chain. The main difference is that the double pitch sprockets are reduce with a specific pitch circle diameter for best engagement. For ep roller chains, the sprockets are the identical if the amount of teeth is 32 or much more for solitary and double chains.
