Sprockets for Balers — Hay, Straw & Cotton Baling Chain Drives
Baler sprockets drive the pickup, compression, knotting, and ejection chain mechanisms in round balers, square balers, and cotton module builders. Operating in extreme heat, dust, and crop residue during peak baling season, these sprockets must deliver reliable, trouble-free performance. We supply baler sprockets in ANSI #50–#80 and ISO 10B–16B with zinc plating, induction-hardened teeth, and precision bores matched to common baler shaft sizes.
Specifications
| Parametre | Menzil | Gelenek |
|---|---|---|
| Saha | 15.875–25.4mm | Evet |
| Zincir | ANSI #50, #60, #80 / ISO 10B–16B | Evet |
| Dişler | 11–30T | 9–45T |
| Malzeme | C45 | 4140 |
| Sertlik | HRC 40–50 | — |
| Yüzey | Zinc plated | Zinc-nickel |
| Merkez | B-Hub keyed | TL |
| Sondaj | H7, 15–40mm | İmparatorluk |
| Strand | Simplex | Duplex |
| Hız | Up to 800 RPM | — |
| Geçici | -5°C to +55°C | — |
| TIR | ≤0,03 mm | — |
| Anahtar yuvası | DIN 6885 / Imperial | — |
| PD (17T #60) | 103.5mm | — |
| OD (17T #60) | 114.9mm | — |
| Max Bore (17T #60) | 30mm | — |
| Weight (17T #60) | 1.1 kg | — |
| Yağlama | Chain oil | — |
| Crop Residue | Extreme — hardened teeth essential | — |
| Sertifika | ISO 9001 | EN 10204 3.1 |
Working Principle / Advantages
Where: Pickup reel drive, compression chamber chain, bale wrap/tie mechanism, bale ejection. İşlev: Drive crop through pickup, compression, tying/wrapping, and discharge stages.
✅ Zinc coating survives season-long outdoor storage. ✅ Hardened teeth resist hay/straw abrasion. ✅ Precision bore prevents PTO vibration damage.
Inferior unhardened, bare steel sprockets corrode between seasons and wear mid-baling, causing field breakdowns at the worst possible time.
Compatibility / Selection / Install
OEM: John Deere*, Case IH*, Claas*, Kuhn*, New Holland* balers. *Compatibility reference only.
Seçme: Baler model → chain pitch → shaft bore → tooth count → zinc plated.
Düzenlemek: PTO off → remove guards → release chain → swap sprocket → align → tension → lubricate → test at low PTO.
Vaka Çalışmaları
Wagga Wagga, NSW: “Sprocket kit for our JD round baler. All matched OEM specs. Ran full baling season trouble-free.” ★★★★★
Dalby, QLD: “#60 on our cotton module builder. Hardened teeth handling the abrasive cotton lint.” ★★★★★
Hamilton, VIC: “Zinc-plated baler sprockets stored outdoors between seasons. No rust. Ready when needed.” ★★★★☆
Northam, WA: “Bulk order for our contract baling fleet. Consistent quality, competitive pricing.” ★★★★★
Mount Gambier, SA: “#50 pickup drive sprockets. Good wear life in our heavy hay baling operation.” ★★★★★
SSS
Pre-season baler kits?
Imperial bores for older balers?
When to replace baler sprockets?
Cotton baler specific?
Minimum sipariş miktarı?
Baler Chains
Tensioners
✅ ISO 9001 ✅ ANSI/ISO ✅ Zinc-plated ✅ Hardened teeth
Ever-Power: Agricultural baler sprocket specialist. 15+ yrs, Australian delivery.
