Sprockets for Balers — Hay, Straw & Cotton Baling Chain Drives
Baler sprockets drive the pickup, compression, knotting, and ejection chain mechanisms in round balers, square balers, and cotton module builders. Operating in extreme heat, dust, and crop residue during peak baling season, these sprockets must deliver reliable, trouble-free performance. We supply baler sprockets in ANSI #50–#80 and ISO 10B–16B with zinc plating, induction-hardened teeth, and precision bores matched to common baler shaft sizes.
Thông số kỹ thuật
| Tham số | Phạm vi | Phong tục |
|---|---|---|
| Sân bóng đá | 15.875–25.4mm | Đúng |
| Xích | ANSI #50, #60, #80 / ISO 10B–16B | Đúng |
| Răng | 11–30T | 9–45T |
| Vật liệu | C45 | 4140 |
| Độ cứng | HRC 40–50 | — |
| Bề mặt | Zinc plated | Zinc-nickel |
| Trung tâm | B-Hub keyed | TL |
| Khoan | H7, 15–40mm | Đế quốc |
| Sợi | Simplex | Nhà song lập |
| Tốc độ | Up to 800 RPM | — |
| Nhiệt độ | -5°C to +55°C | — |
| TIR | ≤0,03mm | — |
| Rãnh then | DIN 6885 / Imperial | — |
| PD (17T #60) | 103.5mm | — |
| OD (17T #60) | 114.9mm | — |
| Max Bore (17T #60) | 30mm | — |
| Weight (17T #60) | 1.1 kg | — |
| Bôi trơn | Chain oil | — |
| Crop Residue | Extreme — hardened teeth essential | — |
| Chứng chỉ | ISO 9001 | EN 10204 3.1 |
Working Principle / Advantages
Ở đâu: Pickup reel drive, compression chamber chain, bale wrap/tie mechanism, bale ejection. Chức năng: Drive crop through pickup, compression, tying/wrapping, and discharge stages.
✅ Zinc coating survives season-long outdoor storage. ✅ Hardened teeth resist hay/straw abrasion. ✅ Precision bore prevents PTO vibration damage.
Inferior unhardened, bare steel sprockets corrode between seasons and wear mid-baling, causing field breakdowns at the worst possible time.
Compatibility / Selection / Install
Nhà sản xuất thiết bị gốc (OEM): John Deere*, Case IH*, Claas*, Kuhn*, New Holland* balers. *Compatibility reference only.
Lựa chọn: Baler model → chain pitch → shaft bore → tooth count → zinc plated.
Cài đặt: PTO off → remove guards → release chain → swap sprocket → align → tension → lubricate → test at low PTO.
Nghiên cứu trường hợp
Wagga Wagga, NSW: “Sprocket kit for our JD round baler. All matched OEM specs. Ran full baling season trouble-free.” ★★★★★
Dalby, QLD: “#60 on our cotton module builder. Hardened teeth handling the abrasive cotton lint.” ★★★★★
Hamilton, VIC: “Zinc-plated baler sprockets stored outdoors between seasons. No rust. Ready when needed.” ★★★★☆
Northam, WA: “Bulk order for our contract baling fleet. Consistent quality, competitive pricing.” ★★★★★
Mount Gambier, SA: “#50 pickup drive sprockets. Good wear life in our heavy hay baling operation.” ★★★★★
Câu hỏi thường gặp
Pre-season baler kits?
Imperial bores for older balers?
When to replace baler sprockets?
Cotton baler specific?
Số lượng đặt hàng tối thiểu?
Baler Chains
Tensioners
✅ ISO 9001 ✅ ANSI/ISO ✅ Zinc-plated ✅ Hardened teeth
Ever-Power: Agricultural baler sprocket specialist. 15+ yrs, Australian delivery.
