Combine harvester sprockets drive the chain mechanisms in grain headers, feeder houses, threshing systems, cleaning shoe drives, and grain elevator augers. These sprockets operate in extreme dust, heat, and crop residue conditions during peak harvest season with zero tolerance for downtime. We supply harvester sprockets in ANSI #50–#80 and ISO 10B–16B with heavy zinc plating, induction-hardened teeth, and precision bores matched to common harvester shaft sizes.
| 范围 | Range | 风俗 |
|---|---|---|
| 沥青 | 15.875–25.4mm | 是的 |
| 链 | ANSI #50, #60, #80 / ISO 10B–16B | 是的 |
| 牙齿 | 13–40T | 9–60T |
| 材料 | C45 / 4140 | — |
| 硬度 | HRC 40–50 | — |
| 表面 | Heavy zinc plate | Zinc-nickel, HDG |
| 中心 | B-Hub 钥匙 | TL, QD |
| 钻孔 | H7, 20–50mm | Imperial available |
| 斯特兰德 | Simplex / Duplex | — |
| 速度 | Up to 1,200 RPM | — |
| 温度 | -5°C to +55°C | — |
| Dust Exposure | Extreme — hardened teeth essential | — |
| 键槽 | DIN 6885 / Imperial | — |
| TIR | ≤0.03mm | — |
| PD (19T #60) | 115.4mm | — |
| OD (19T #60) | 127.0mm | — |
| Max Bore (19T #60) | 35mm | — |
| Weight (19T #60) | 1.4 kg | — |
| Lubrication | Chain oil / grease | — |
| 证书 | ISO 9001 | EN 10204 3.1 |
Where: Header drive, feeder house chain, threshing drum, straw walker, grain elevator, tailings return. 功能： Drive crop through cutting, threshing, separation, and grain transport stages simultaneously.
✅ Zinc-plated vs bare steel — survives harvest season stored outdoors without corrosion.
✅ HRC 40-50 teeth — resists abrasive crop dust and chaff. Unhardened teeth wear mid-season causing costly downtime.
✅ Precision bore — vibration-free at high RPM on threshing drum drives.
OEM： John Deere*, Case IH*, Claas*, New Holland*, AGCO/Massey Ferguson* harvesters.
*仅供兼容性参考。
选择： ❶ OEM model → identify chain ❷ Shaft bore (metric or imperial) ❸ Tooth count ❹ Zinc plated for outdoor ❺ Order pre-season for harvest readiness.
安装： Engine off → remove belt guards → release chain → swap sprocket → align → tension → lubricate → test at idle RPM.
Issues: Mid-harvest tooth wear = dust ingress (use hardened + pre-season replacement). Chain wrapping around sprocket = broken chain strand (replace immediately). Vibration = bore wear (replace sprocket).
Moree, NSW: “Pre-season sprocket kit for our JD S780. All 8 sprockets matched OEM specs. Harvest ran without a single chain issue.” ★★★★★
Emerald, QLD: “Zinc-plated #60 for our sorghum harvester feeder house. Survived two seasons in tropical humidity.” ★★★★★
Esperance, WA: “Bulk sprocket order for 5 harvesters. Consistent bore dimensions across the lot. Good pricing.” ★★★★☆
Horsham, VIC: “Hardened teeth on grain elevator sprocket. Previous unhardened brand wore out mid-harvest. These lasted the full season.” ★★★★★
Clare, SA: “#80 on our Claas header drive. Imperial bore machined to spec. Fitted perfectly.” ★★★★★
Harvester Chains
Tensioners
✅ ISO 9001 ✅ ANSI/ISO ✅ Zinc-plated ✅ Hardened teeth | Ever-Power: agricultural sprocket specialist.
Paper and Fabric Finishing Equipment Paper and fabric finishing sprockets drive the chain mechanisms in…
Material Cutting Machinery Material cutting machinery sprockets drive the feed mechanisms in shearing machines, slitting…
Coil Handling Machinery Coil handling sprockets drive the chain conveyors and turnstile mechanisms that transport…
Sawmill Equipment Sawmill sprockets drive log deck chains, carriage feed mechanisms, debarker conveyors, and timber…
Bulk Material Mining Conveyors Bulk material mining conveyor sprockets drive the primary and secondary conveyor…
Earthmoving Equipment Earthmoving equipment sprockets drive the track chains, bucket mechanisms, and conveyor systems on…