Escalator sprockets drive the step chain that moves the continuous loop of steps between floors in shopping centres, train stations, airports, and commercial buildings across Australia. As safety-critical components, escalator sprockets must meet strict dimensional tolerances, material traceability requirements, and fatigue life standards. We supply escalator drive and return sprockets in sizes compatible with major escalator OEMs, manufactured from 4140 alloy steel with induction-hardened teeth, precision bores, and full EN 10204 Type 3.1 material certification.
| 范围 | Range | 风俗 |
|---|---|---|
| 沥青 | 133.33mm (step chain standard) | OEM特定 |
| Chain Type | Escalator step chain | — |
| 牙齿 | 17–25T (typical) | OEM特定 |
| 材料 | 4140合金钢 | C45 for light duty |
| 硬度 | HRC 45–55 | — |
| 钻孔 | H7 precision, keyed | H6 |
| TIR | ≤0.02毫米 | — |
| 表面 | 黑色氧化物 | 锌、磷酸盐 |
| 速度 | 0.5 m/s (standard) | 0.65 m/s (high speed) |
| Fatigue Life | >20 million cycles | — |
| Safety Standard | AS 1735.5 / EN 115-1 | — |
| 重量 | 12–25 kg (by size) | — |
| Duty | 18–20 hours/day | 24/7 in transit |
| 温度 | -10°C to +50°C | — |
| 键槽 | DIN 6885 | OEM特定 |
| 中心 | B-Hub 钥匙 | C-Hub |
| Tooth Profile | AGMA precision | — |
| Lubrication | Automatic drip / manual | — |
| 噪音 | <65 dB (public area) | — |
| 证书 | ISO 9001，EN 10204 3.1 | 全程可追溯性 |
▶ 4140 alloy steel standard — exceeds fatigue requirements for public-safety escalator drives
▶ HRC 45–55 hardened teeth — handles 20+ million step cycles without measurable tooth deformation
▶ 0.02mm TIR bore — smooth, vibration-free operation essential for passenger comfort and safety
▶ Full EN 10204 3.1 traceability — mandatory for escalator compliance audits under AS 1735.5
Inferior sprockets with unknown material grade, inconsistent hardness, or poor bore quality create safety risks in public escalator applications and will fail compliance audits.
The escalator 驱动链轮 is mounted on the main drive shaft at the upper landing, powered by a worm or helical gearbox connected to the main motor. It engages the step chain — a pair of heavy-duty roller chains connected to each step axle. As the drive sprocket rotates, it pulls the step chain in a continuous loop, carrying steps upward on the passenger side and returning them underneath. The return sprocket (tension sprocket) at the lower landing guides the chain around the turn and maintains proper chain tension via spring or gravity tensioners.
Key locations: Upper landing (drive), lower landing (return/tension). 功能： Continuous step movement at 0.5m/s, passenger transport between floors, safety-critical torque transmission.
OEM： Dimensionally compatible with sprockets on Otis*, Schindler*, KONE*, ThyssenKrupp*, Mitsubishi* escalator systems.
Step chains: Compatible with standard 133.33mm pitch escalator step chains and OEM-specific chain variants.
*Brand names referenced for compatibility identification only.
1. Identify escalator OEM model and year. 2. Obtain existing sprocket drawing or dimensions (pitch, teeth, bore, keyway). 3. Specify material requirement (4140 for compliance). 4. Confirm surface treatment. 5. Request EN 10204 3.1 cert with order.
1. Isolate escalator per AS 1735.5. LOTO main power + auxiliary brake. 2. Remove step chain tension. 3. Disconnect drive shaft coupling. 4. Remove old sprocket (may require hydraulic puller on press-fit types). 5. Install new sprocket, key, torque fasteners. 6. Reconnect shaft, re-tension step chain per OEM specification. 7. Run empty at low speed for 30 minutes. 8. Load test per AS 1735.5 before returning to service.
| 问题 | 原因 | 使固定 |
|---|---|---|
| Step chain noise increase | Worn teeth or dry chain | Inspect sprocket, lubricate chain |
| Vibration at drive station | Sprocket bore runout | Check TIR, replace if >0.05mm |
| Step chain jumping | Critical tooth wear + chain elongation | Replace sprocket + chain. Emergency shutdown |
| Uneven step spacing | Chain pitch variation from worn sprocket | Replace sprocket, measure chain pitch |
| Motor overload trip | Stiff chain or seized step roller | Inspect full chain path, lubricate |
Sydney, NSW — Westfield Shopping Centre: “Replaced drive sprockets on 8 escalators during annual shutdown. 4140 steel with full 3.1 certs. Passed compliance audit without query.” ★★★★★
Melbourne, VIC — Train Station: “24/7 escalator service. Our Ever-Power sprockets have been running 18 months on 3 high-traffic escalators. Zero issues.” ★★★★★
Brisbane, QLD — Airport Terminal: “High-speed 0.65m/s escalator sprockets. Dimensional accuracy was spot-on to OEM drawing. Material cert verified by our structural engineer.” ★★★★☆
Perth, WA — Office Tower: “Return sprockets on 4 escalators. Good quality, smooth chain engagement, professional documentation.” ★★★★★
Adelaide, SA — Hospital Complex: “Safety-critical application. Ever-Power provided full material traceability and dimensional inspection reports. Our compliance team approved without reservation.” ★★★★★
Step Chains
Tensioners
✅ ISO 9001 ✅ AS 1735.5 / EN 115-1 compatible ✅ EN 10204 3.1 ✅ 4140 alloy standard
We are a full-range power transmission manufacturer. 15+ years experience, ISO 9001 certified, CNC precision, full material traceability for safety-critical escalator applications in Australia.
Paper and Fabric Finishing Equipment Paper and fabric finishing sprockets drive the chain mechanisms in…
Material Cutting Machinery Material cutting machinery sprockets drive the feed mechanisms in shearing machines, slitting…
Coil Handling Machinery Coil handling sprockets drive the chain conveyors and turnstile mechanisms that transport…
Sawmill Equipment Sawmill sprockets drive log deck chains, carriage feed mechanisms, debarker conveyors, and timber…
Bulk Material Mining Conveyors Bulk material mining conveyor sprockets drive the primary and secondary conveyor…
Earthmoving Equipment Earthmoving equipment sprockets drive the track chains, bucket mechanisms, and conveyor systems on…